110
Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96 1054K07B.FM
Operation with Comfort Mobile Unit Lock
Using the system lock, you can prevent the base station from being used for outgoing calls. Calls
can still be received.
Exception: Connection setup with an emergency number is possible even if the system lock is
activated. Up to four 16-character emergency numbers can be stored.
1. In the idle state, push the ßkey and select “Service” from the main menu.
2. In the Service menu, select “System settings” and enter the system code
(see also page 115).
After the correct system code is entered,
the following display appears:
Scroll, using NEXT, through the next menu
until “System lock” is in the 1st line; select
this with OK.
The menu for setting the system lock
appears (entire menu at left).
You can, using NEXT / OK, select and edit
the following options:
Activate / deactivate lock
View / change emergency numbers
The emergency number can be changed
after selecting it from the list.
Enter new emergency numbers
Individually delete emergency number.
Note:
●If you have activated both telephone lock with hotline (see page 114) and system lock with
emergency numbers, dialing cannot occur. Exception: The hotline number is the same as the
emergency number.
Lock to Prevent Outgoing Calls / Emergency Numbers
Lock ON
Phone no. list
New entry
Del. phone no.
- - - - - - -
System lock
Sys cd/Mn sys cd
OK
Duration/Units
NEXT
Call barring
Lock ON
OK
Phone no. list
NEXT
New entry
Lock ON
Phone no. list
New entry
Del. Phone No.
System lock
activated
OK
12345678_
Emrg. no.?
01_
Emrg. no.?
SAVE
12345678
DELETE
23456789
NEXT
- - - - - - - -