120
Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96 1054K07C.FM
Operation with Comfort Mobile Unit System Settings
Set / Change the Number of Rings for Group Call
By selecting the number of rings, you can stipulate the number of tone rings which are signalled
at call group 1 before the call is diverted to call group 2.
After choosing “External 1/2” (see previous
page), the menu shown here appears:
Scroll, using NEXT...
until “No. of ring cycles” appears in the 1st
line; then select with OK.
Push OK if you only want to view
or
Push the digit key to enter the number of
rings; here, 5.
Push this key to save the entry.
You can stipulate which internal stations are to be signalled by the door interphone. These inter-
nal stations can also then open the door.
1. In idle status, push the ßkey and select “Service” from the main menu.
2. In the Service menu, select “System settings” and enter the system code
(see page 115).
After the correct system code is entered,
the following menu appears:
Scroll through the menu with NEXT ...
After selecting “a/b line” from the “Equip-
ment data” menu ,
scroll with NEXT...
until “a/b line 9“ is on the 1st line; then sel-
ect with OK.
Scroll with NEXT ...
until “New: doorstation” is on the 1st line;
select with OK.
The following list appears; enter station 1
and 2 here.
Push this if you only want to view
or
Enter one-digit internal number; here, 4;
if necessary, correct with .
Push this key to save the list.
Ring Allocation for the Door Interphone
External 1/2
No.of ring cycles
Ring Allocation
No. of cycles
OKNEXT
Pause ring end
ring cycles
Set number of
3
OK
1...9
SAVE
Set number of
Save
5
ring cycles
Duration/Units
Tel. no. lock
OK
Change Sys.code
NEXT
a/b line
a/b line 9
New:doorstation
OK
SAVE
0...8
a/b line 0
a/b line 9
OK
Internal 1
NEXT
Active: Telephone
New: Doorstation
OK
New: Modem
NEXT
1 2
Door call to
OK
1 2 4
Door call to
SAVE