Connection with the Door Interphone | Siemens 1054 manual

28.10.96

1054K08.FM

Gigaset 1054, GBR: A30852-X954-B101-1-7619

Operation with Auxiliary Device	Switching Functions

Connection with the Door Interphone

The door interphone can only be connected to an auxiliary device with the internal station num- ber 9.

Call is signalled from the door interphone. (3 short tones)

cPick up the handset.

You are now connected with the door interphone.

R 9	Push these keys to activate the door opener.
	The door opener is activated for 3 seconds.

You can activate the door opener repeatedly.

The connection with the door interphone remains.

aHang up the handset to terminate the connection with the door interphone.

129

Image 135

Siemens 1054 operating instructions Connection with the Door Interphone, You are now connected with the door interphone

Contents

Gigaset 28.10.96 1054TIT.FM Gigaset 1054 A30852-X954-B101-1-7619 Table of Contents Outgoing Calls Operation with Standard Mobile Unit Standard SettingsSwitching Features Incoming Calls Lock System SettingsMobile Unit Settings Operation with Comfort Mobile Unit Using the Menu Operation with Auxiliary Device Outgoing Calls Switching FunctionsTelephone Book Charges, Call Length Operation on Telephone Systems Standard Mobile Unit Using the FeaturesAcoustic Signalling Multicell System Table of Contents Introduction About this DeviceAbout the Operating Instructions Overview Figures Front Registration Key to register the mobile unitsRear Comfort Mobile Unit 1000C Standard Mobile Unit 1000S Important Tips Safety Precautions Putting Into Service Recommendation Step by Step Instructions Putting Into Service Base Station Gigaset Contents of PackageSpecial Accessories Installation Site / Selection of the Mounting Site Range Mounting / Connecting the Base Station Connections for Gigaset Specifications for Wall Mounting Status of the Base Station Upon Delivery Connection Options at the Base Station Tips for Individuals with Hearing Aids Putting Into Service Mobile UnitInstalling and Charging the Rechargeable Batteries Installing the batteries in the mobile unit Mobile Unit Gigaset 1000S Gigaset 1000C Mounting the Carrying Clip on the Mobile Unit UUPzAH Putting Into Service Standard Mobile UnitSymbol Explanation Symbols Explanation On OFF, Lock Status Zzzz You will hear the key acknowledg- ment tone Switching the Status Switching from on statusSwitching from OFF status Switching from Lock status 12345678 Viewing and Setting the Dialing Mode Determining the Dialing Mode of Your Telephone012 Putting Into Service Comfort Mobile Unit DisplayGraphic Explanation OFF ON, OFF, Lock Status You will hear the key acknowledgment tone Registration key Viewing Your Own Internal Number At initialization, your telephone is set for tone dialing Determining the Dialing Mode of Your Telephone Connection Can be connected Internal station no Register on system as Putting Into Service Non-Cordless DevicesConnecting Non-Cordless Devices other than telephones Connection Jacks KL1/KL2 Connection Points for the TFE Adapter Box Connection Examples for Door Interphones via TFE TipPlease note for door interphone adapter TFE/V Every digit entered replaces one of the first 4 dashes Operation with Standard Mobile Unit Standard SettingsSaving / Changing the System Code Be sure to note this Enter the previously-set mobile unit Procedure is complete New mobile unit PIN is storedEnter / Change Mobile Unit PIN Push the 8 key Pitch Setting Tone Ring of the Mobile Unit Volume To activate, push the 1 key status at initialization Current settings are shown012 N3 2 Activate / Deactivate Automatic Line Seizure Every digit entered replaces one dash on the screen Activate / Deactivate Call Pickup Operation with Standard Mobile Unit Incoming Calls Call Pickup CD F 123456 Automatic line seizure is not pro- grammed External Dialing, Using Dialpad1123456 Operation with Standard Mobile Unit Outgoing Calls Automatic Line Seizure Not Programmed Using the Dialpad for External Dialing as En-Bloc Dialing123456 0123456 Automatic Line Seizure Programmed Number Redial as En-Bloc Dialing 11234567812345678 34567890 034567890 Number Redial 236 Internal Call to Another Mobile Unit or Auxiliary DeviceInternal Dialing with Collective Call Phone number stored at that memory location is dialed Dialing Speed Dial NumbersFinding and Dialing Speed Dial Numbers Direct Dial of Speed Dial Numbers Station number of the internal sta- tion and INT blink Operation with Standard Mobile Unit During the CallPlacing a Call on Hold Placing an Internal Call on Hold Operation with Standard Mobile Unit During a Call Dialing mode is changed to tone dialing Temporary Switch to Tone Dialing Confirm Stored Telephone Number 333333Operation with Standard Mobile Unit Speed Dial Speed Dial Numbers Storing, Viewing or Changing Delete Speed Dial Numbers Operation with Standard Mobile Unit Speed Dialing 0123 Operation with Standard Mobile Unit Switching Features 234567890 External ConsultationOr Terminate External Consultation 2345678 Way Conference from Within an External Consultation Call Way ConferenceWay Conference from Within an Internal Consultation Call Terminate 3-Way Conference 91 7 Activate Internal Call ForwardingDeactivate Internal Call Forwarding Connection with the Door Interphone Operation with Standard Mobile UnitSwitching Features 1or 0 To activate, push the 1 key initialization status 00-00Display of Call Length Activate / Deactivate #!o Examples Call Charge Display 2346.207000598 Every digit enters replaces one dash on the screen Call Charge Factor Viewing or Setting Call Charge Display of Previous Call Activate / DeactivatePush 0 to deactivate.initialization status Delete Charge Total N12 33.00Call Charge Totals per Internal Station View / Delete #§o View Total Charges View the Total Charges N12 012 90 300 0 Call Charge Totals per Telephone Line View / Delete To deactivate, push the 0 key initialization status Operation with Standard Mobile Unit LockLock for Outgoing Calls System Lock Activate / Deactivate #$o #%o 110112 Emergency Numbers Store / View Or Enter Barred Number 0190Barred Numbers Store Viewing Delete Barred Numbers 01234Activate / Deactivate Barred Numbers List of the registered stations is dis- played 012 N1 2 Example Locking the Mobile Unit / Activate HotlineEvery digit entered Replaces one dash on the screen Or enter Hotline Number View / Delete / StoreView Or delete Display without hotline number or With hotline number Dial Hotline Number Mobile unit is lockedHotline number is dialed Unlock Mobile Unit Mobile unit is locked Operation with Standard Mobile Unit System Settings Ring Allocation for External Calls Collective CallGroup Call with Call Diversion Pickup Ring Allocation Enter or Change Collective Call Group 012 N2 1 N2 1 0123 Ring Allocation Enter or Change Group Call 012 N2 2 N2 2 012 Call group Cancel registration Mobile Unit 012 123Ring Allocation for the Door Interphone Resetting the Base Station to the Status at Initialization Resets to initialization Deletes StatusDoes not change Operation with Standard Mobile Unit Mobile Unit Settings Press the 0 to deactivate Battery Alarm Tone Activate / DeactivateRange Alarm Tone Activate / Deactivate Press the 1 to activate initialization status Resetting the Mobile Unit to Initialization Status Operation with Comfort Mobile Unit Using the Menu Using the Dialog KeysEntire Menu Menu Structure for System Settings Idle StateEquip. data Example 2 External Consultation in External Call Status-Dependent MenusExample 1 In Internal Call Menu appears Entire menu at left Operation with Comfort Mobile Unit Standard Settings Enter / Change System CodeRepeat the new system code Set Tone Ringing for Mobile Unit Set Dialog Language Next OK Save OFF Activate / Deactivate Automatic seizure for Internal Station Push the F-keymain menu appears Operation with Comfort Mobile Unit Incoming Calls If Automatic line seizure see page 84 is activated Second call is terminated thereby Or set up a 3-way conferenceYou will hear the external call and can accept it Answer a Call Waiting During an External Call No Automatic Line Seizure Activated Operation with Comfort Mobile Unit Outgoing CallsExternal Dialing with Dialpad Automatic Line Seizure Activated Initialization Status Mobile Unit not Fully Trunk Authorized Telephone Line is Busy No Automatic Line Seizure is Activated External En-Bloc Dialing with DialpadAutomatic Line Seizure Activated It is displayed in an enlarged form here Phone number is dialed Play hereOr a Phone number is shown on the screen here Internal Dialing to Another Mobile Unit or Auxiliary Device @...9Calling You carry on the internal call Entering Letters Dialing from the Telephone Book Place External Call on Hold Operation with Comfort Mobile Unit During the CallCall on Hold Internal station 5 is then placed on hold At the time of initialization, tone dialing is pre-set 12345678 Mute On Change Handset VolumeOr Change Handset Volume Mute Function Operation with Comfort Mobile Unit Telephone Book Dialing Convenience with the Telephone Book Editing the Telephone BookEntries are sorted alphabetically in the tele- phone book Next Delete Entry is deleted Transfer Call Operation with Comfort Mobile Unit Switching FunctionsInternal Consultation / Transfer of Call Activate Internal Consultation External Consultation / Transfer Call Activate External ConsultationOKThe first external station is now reconnec- ted with you Press this to terminate toggle Toggle with Internal and External StationsToggle Between External Stations Terminate Toggle Or e Original external call External Call Parallel to an Internal ConsultationInternal Call Parallel to an External Consultation External Call Parallel to an External Consultation Activate/ Deactivate Internal Call Forwarding Menu for setting the system functions appears Connection to the Door Interphone You are connected to the door interphoneConnection to the door interphone remains Display of cost in DM Operation with Comfort Mobile Unit Charges, Call LengthDisplay of Charges / Display of Call Length Display of Units Main menu appears INT1 Lock to Prevent Outgoing Calls / Emergency Numbers Operation with Comfort Mobile Unit Lock Delete all Acknowledgment appears for 2 sec- onds Delete All Barred Numbers Set the COS for Internal Stations Cancel Registration of Mobile Unit Lock Unlock Select Lock OFF within 3 seconds, using OKLock Mobile Unit /Change Hotline Number / Mobile Unit PIN Operation with Comfort Mobile Unit System Settings First Steps for System SettingsPush the F-key,the main menu appears Set Connection Configuration for Internal Stations Set Non-cordless Station Lines a/b linesSet Cordless Station Connections Setting is displayed for 2 seconds Resets to Deletes Unchanged Status at initialization External Allocated Telephone line Internal station Set / Change Ring Allocation and Ring Cycles Set / Change the Number of Rings for Group Call Push the F key main menu appears Cancel Registration for Mobile Unit Activate / Deactivate Advisory and Alarm Tones Operation with Comfort Mobile Unit Mobile Unit Settings You will hear the trunk dial tone Operation with Auxiliary Device Outgoing CallsGeneral You will hear the internal dial tone Connection is terminated Phone reverts to pulse dialing Answer Call Waiting Or you can set up a 3-way conference callOperation with Auxiliary Device Incoming Calls You have picked up the external call Call forwarding is activated Internal call forwarding is deactivatedPush these keys to place the call on hold Operation with Auxiliary Device Switching Functions You can now continue with the original call Toggle with a Telephone with Pulse DialingYou can continue with the original call Toggle with a Telephone with Tone Dialing You are now connected with the door interphone Multicell System Organization of Base Stations and Mobile UnitsTips for Operation Multicell System Standard Mobile Unit Then within 1 minute on the Mobile UnitAt the time of initialization, the system code is set at Combined Selection of the Base Station Base Station Selection, Automatic / Manual / Combined= Automatic registration is activated. . The 0 blinks Number entered will blink here Activate / Deactivate the Base Station Number Push the 0 to deactivate. Status at initializationDisplay of the base station here Register Comfort Mobile Unit on Multiple Base Stations Multicell System Comfort Mobile Unit Multicell System Comfort Mobile Unit Base Stations Selection Automatic / Manual / Combined Thereafter Operation on Telephone Systems Standard Mobile Unit Enter Main Trunk Code Hakz Every digit entered replaces one dash on the display Setting is saved AKZ / Hakz is / are deleted Deleting AKZ and Hakz #!o 25 §%Setting at initializ Then Set / Change Time for FlashSet the Time for F Seconds Enter the Trunk Code AKZ Operation on Telephone Systems Comfort Mobile Unit 12345u34567 Operation on Telephone Systems Using the Features12345 12345u Terminate Consultation Example Setting Up a Consultation with Comfort Mobile UnitOr Switch the Call You are engaged in a consultation call Acoustic Signalling General Information Error Possible Cause What To Do Tips for Troubleshooting Warranty Siemens Service Germany-wide telephone number 0180 5333Contact Partners Connection Configuration Glossary Park Unpark a Call StationTC System LED Index Hold 43, 95 Register Mobile unit Quick Reference Operating Instructions Standard Mobile Unit Dialing an Internal Telephone Number Setting Tone Ring PitchStandard Mobile Unit in Operation Accepting a Call Dialing an External Telephone Number Accepting a Call Waiting Call Internal Consultation during an External CallExternal Consultation during an External Call Forwarding an External Call to an Internal Station Quick Reference Operating Instructions Comfort Mobile Unit Setting the Handset Volume during a Call Setting the Tone Ring Volume Comfort Mobile Unit in Operation Accepting a CallDialing an Internal Telephone Numberpage Dialing the Telephone Number from the Telephone Book Storing the Telephone Number and Name in the Telephone Book Quick Reference Operating Instructions Auxiliary Device Toggle page 128 Telephone with Tone Dialing Toggle page 128 Telephone with Pulse Dialing Siemens Aktiengesellschaft