Main menu appears | Siemens 1054 guide

28.10.96

1054K07B.FM

Gigaset 1054, GBR: A30852-X954-B101-1-7619

Operation with Comfort Mobile Unit	Charges, Call Length

Activate and Deactivate Call Length and Call Charge Display / Set the Unit Cost

In order to be able to use this feature, you must first apply to the German Telekom AG to have your phone lines set up for “unit measurement”.

Your Gigaset 1054 can display either the telephone units, the charges or the call length. At the time of initialization, the call length display is activated.

The type of display selected appears on all mobile units.

The Comfort mobile unit is in idle state.

a

Telephone Book

ß

Service

System settings

Push this button.

The main menu appears.

Scroll through the main menu with lNEXT until “Service“ is in the 1st line; then select “Service” with OK.

In the next menu, scroll with NEXT until “System settings” is in the 1st line; select with OK.

Enter the 4-digit system code after “Sys-

tem settings; if necessary, use to cor- rect.

Redial Telephone lock

NEXT		OK

Call forward. ON

Cancel registr. System settings

NEXT		OK

Enter

system code:

- - - -

OK

Length/Units

Call duration Units/Charges ChargFactor-.-- ChargFactor---

Seize displ. ON

Total

Total per unit

- - - - - - - -

Confirm system code with OK.

Select “Duration/Units” with OK.

The menu for setting call length display or charge data appears. (Entire menu at left).

Using NEXT / OK, you can select and edit the following options:

Sys cd/Mn sys cd

Duration/Units Call barring

NEXT OK

Duration of Call

Units/Charges

ChargFactor-.--

NEXT OK

Call duration

Activate / deactivate display of the call length.

Activation of the call length display automat- ically deactivates any call charge display which might be on!

Recording call duration Ext1 activated!

OFF		OK

Units/Charges

Activate / deactivate the call charge units Activation of the call charge display auto- matically deactivates any call length display which might be on!

Units/ Charges Ext1 deactivated!

ON OK

Continued

108

Image 114

Siemens 1054 operating instructions Main menu appears

Contents

Gigaset 28.10.96 1054TIT.FM Gigaset 1054 A30852-X954-B101-1-7619 Table of Contents Incoming Calls Operation with Standard Mobile Unit Standard SettingsSwitching Features Outgoing Calls Operation with Comfort Mobile Unit Using the Menu System SettingsMobile Unit Settings Lock Charges, Call Length Switching FunctionsTelephone Book Operation with Auxiliary Device Outgoing Calls Multicell System Using the FeaturesAcoustic Signalling Operation on Telephone Systems Standard Mobile Unit Table of Contents Introduction About this DeviceAbout the Operating Instructions Overview Figures Front Registration Key to register the mobile unitsRear Standard Mobile Unit 1000S Comfort Mobile Unit 1000C Safety Precautions Important Tips Putting Into Service Step by Step Instructions Recommendation Putting Into Service Base Station Gigaset Contents of PackageSpecial Accessories Installation Site / Selection of the Mounting Site Mounting / Connecting the Base Station Range Specifications for Wall Mounting Connections for Gigaset Connection Options at the Base Station Status of the Base Station Upon Delivery Installing the batteries in the mobile unit Putting Into Service Mobile UnitInstalling and Charging the Rechargeable Batteries Tips for Individuals with Hearing Aids Mounting the Carrying Clip on the Mobile Unit Mobile Unit Gigaset 1000S Gigaset 1000C Symbols Explanation Putting Into Service Standard Mobile UnitSymbol Explanation UUPzAH Zzzz On OFF, Lock Status Switching from Lock status Switching the Status Switching from on statusSwitching from OFF status You will hear the key acknowledg- ment tone 12345678 Viewing and Setting the Dialing Mode Determining the Dialing Mode of Your Telephone012 Putting Into Service Comfort Mobile Unit DisplayGraphic Explanation ON, OFF, Lock Status OFF You will hear the key acknowledgment tone Registration key Viewing Your Own Internal Number Determining the Dialing Mode of Your Telephone Connection At initialization, your telephone is set for tone dialing Connection Jacks Putting Into Service Non-Cordless DevicesConnecting Non-Cordless Devices other than telephones Can be connected Internal station no Register on system as Connection Points for the TFE Adapter Box KL1/KL2 Connection Examples for Door Interphones via TFE TipPlease note for door interphone adapter TFE/V Be sure to note this Operation with Standard Mobile Unit Standard SettingsSaving / Changing the System Code Every digit entered replaces one of the first 4 dashes Push the 8 key Procedure is complete New mobile unit PIN is storedEnter / Change Mobile Unit PIN Enter the previously-set mobile unit Setting Tone Ring of the Mobile Unit Volume Pitch Activate / Deactivate Automatic Line Seizure Current settings are shown012 N3 2 To activate, push the 1 key status at initialization Activate / Deactivate Call Pickup Every digit entered replaces one dash on the screen Operation with Standard Mobile Unit Incoming Calls CD F Call Pickup 123456 Operation with Standard Mobile Unit Outgoing Calls External Dialing, Using Dialpad1123456 Automatic line seizure is not pro- grammed Automatic Line Seizure Programmed Using the Dialpad for External Dialing as En-Bloc Dialing123456 0123456 Automatic Line Seizure Not Programmed Number Redial 11234567812345678 34567890 034567890 Number Redial as En-Bloc Dialing 236 Internal Call to Another Mobile Unit or Auxiliary DeviceInternal Dialing with Collective Call Direct Dial of Speed Dial Numbers Dialing Speed Dial NumbersFinding and Dialing Speed Dial Numbers Phone number stored at that memory location is dialed Placing an Internal Call on Hold Operation with Standard Mobile Unit During the CallPlacing a Call on Hold Station number of the internal sta- tion and INT blink Operation with Standard Mobile Unit During a Call Temporary Switch to Tone Dialing Dialing mode is changed to tone dialing Speed Dial Numbers Storing, Viewing or Changing 333333Operation with Standard Mobile Unit Speed Dial Confirm Stored Telephone Number Operation with Standard Mobile Unit Speed Dialing Delete Speed Dial Numbers Operation with Standard Mobile Unit Switching Features 0123 234567890 External ConsultationOr Terminate External Consultation 2345678 Terminate 3-Way Conference Way ConferenceWay Conference from Within an Internal Consultation Call Way Conference from Within an External Consultation Call 91 7 Activate Internal Call ForwardingDeactivate Internal Call Forwarding Operation with Standard Mobile UnitSwitching Features Connection with the Door Interphone #!o 00-00Display of Call Length Activate / Deactivate 1or 0 To activate, push the 1 key initialization status Every digit enters replaces one dash on the screen 2346.207000598 Examples Call Charge Display Call Charge Factor Viewing or Setting Call Charge Display of Previous Call Activate / DeactivatePush 0 to deactivate.initialization status View Total Charges N12 33.00Call Charge Totals per Internal Station View / Delete #§o Delete Charge Total Call Charge Totals per Telephone Line View / Delete N12 012 90 300 0 View the Total Charges #$o Operation with Standard Mobile Unit LockLock for Outgoing Calls System Lock Activate / Deactivate To deactivate, push the 0 key initialization status Emergency Numbers Store / View 110112 #%o Viewing 0190Barred Numbers Store Or Enter Barred Number List of the registered stations is dis- played 01234Activate / Deactivate Barred Numbers Delete Barred Numbers 012 N1 2 Replaces one dash on the screen Locking the Mobile Unit / Activate HotlineEvery digit entered Example Or delete Hotline Number View / Delete / StoreView Or enter Unlock Mobile Unit Mobile unit is locked Dial Hotline Number Mobile unit is lockedHotline number is dialed Display without hotline number or With hotline number Operation with Standard Mobile Unit System Settings Ring Allocation for External Calls Collective CallGroup Call with Call Diversion Pickup 012 N2 1 N2 1 0123 Ring Allocation Enter or Change Collective Call Group 012 N2 2 N2 2 012 Ring Allocation Enter or Change Group Call Call group Cancel registration Mobile Unit 012 123Ring Allocation for the Door Interphone Resetting the Base Station to the Status at Initialization Resets to initialization Deletes StatusDoes not change Operation with Standard Mobile Unit Mobile Unit Settings Press the 1 to activate initialization status Battery Alarm Tone Activate / DeactivateRange Alarm Tone Activate / Deactivate Press the 0 to deactivate Resetting the Mobile Unit to Initialization Status Operation with Comfort Mobile Unit Using the Menu Using the Dialog KeysEntire Menu Menu Structure for System Settings Idle StateEquip. data Menu appears Entire menu at left Status-Dependent MenusExample 1 In Internal Call Example 2 External Consultation in External Call Operation with Comfort Mobile Unit Standard Settings Enter / Change System CodeRepeat the new system code Set Dialog Language Set Tone Ringing for Mobile Unit Next OK Save OFF Activate / Deactivate Automatic seizure for Internal Station Push the F-keymain menu appears Operation with Comfort Mobile Unit Incoming Calls If Automatic line seizure see page 84 is activated Answer a Call Waiting During an External Call Or set up a 3-way conferenceYou will hear the external call and can accept it Second call is terminated thereby Automatic Line Seizure Activated Initialization Status Operation with Comfort Mobile Unit Outgoing CallsExternal Dialing with Dialpad No Automatic Line Seizure Activated Telephone Line is Busy Mobile Unit not Fully Trunk Authorized It is displayed in an enlarged form here External En-Bloc Dialing with DialpadAutomatic Line Seizure Activated No Automatic Line Seizure is Activated Phone number is shown on the screen here Play hereOr a Phone number is dialed Internal Dialing to Another Mobile Unit or Auxiliary Device @...9Calling You carry on the internal call Dialing from the Telephone Book Entering Letters Internal station 5 is then placed on hold Operation with Comfort Mobile Unit During the CallCall on Hold Place External Call on Hold 12345678 At the time of initialization, tone dialing is pre-set Mute Function Change Handset VolumeOr Change Handset Volume Mute On Operation with Comfort Mobile Unit Telephone Book Dialing Convenience with the Telephone Book Editing the Telephone BookEntries are sorted alphabetically in the tele- phone book Entry is deleted Next Delete Activate Internal Consultation Operation with Comfort Mobile Unit Switching FunctionsInternal Consultation / Transfer of Call Transfer Call External Consultation / Transfer Call Activate External ConsultationOKThe first external station is now reconnec- ted with you Terminate Toggle Toggle with Internal and External StationsToggle Between External Stations Press this to terminate toggle External Call Parallel to an External Consultation External Call Parallel to an Internal ConsultationInternal Call Parallel to an External Consultation Or e Original external call Menu for setting the system functions appears Activate/ Deactivate Internal Call Forwarding Connection to the Door Interphone You are connected to the door interphoneConnection to the door interphone remains Display of Units Operation with Comfort Mobile Unit Charges, Call LengthDisplay of Charges / Display of Call Length Display of cost in DM Main menu appears INT1 Operation with Comfort Mobile Unit Lock Lock to Prevent Outgoing Calls / Emergency Numbers Delete all Delete All Barred Numbers Acknowledgment appears for 2 sec- onds Set the COS for Internal Stations Cancel Registration of Mobile Unit Lock Unlock Select Lock OFF within 3 seconds, using OKLock Mobile Unit /Change Hotline Number / Mobile Unit PIN Operation with Comfort Mobile Unit System Settings First Steps for System SettingsPush the F-key,the main menu appears Set Connection Configuration for Internal Stations Set Non-cordless Station Lines a/b linesSet Cordless Station Connections Resets to Deletes Unchanged Status at initialization Setting is displayed for 2 seconds External Allocated Telephone line Internal station Set / Change Ring Allocation and Ring Cycles Set / Change the Number of Rings for Group Call Cancel Registration for Mobile Unit Push the F key main menu appears Operation with Comfort Mobile Unit Mobile Unit Settings Activate / Deactivate Advisory and Alarm Tones You will hear the internal dial tone Operation with Auxiliary Device Outgoing CallsGeneral You will hear the trunk dial tone Connection is terminated Phone reverts to pulse dialing You have picked up the external call Or you can set up a 3-way conference callOperation with Auxiliary Device Incoming Calls Answer Call Waiting Call forwarding is activated Internal call forwarding is deactivatedPush these keys to place the call on hold Operation with Auxiliary Device Switching Functions Toggle with a Telephone with Tone Dialing Toggle with a Telephone with Pulse DialingYou can continue with the original call You can now continue with the original call You are now connected with the door interphone Multicell System Organization of Base Stations and Mobile UnitsTips for Operation Multicell System Standard Mobile Unit Then within 1 minute on the Mobile UnitAt the time of initialization, the system code is set at Number entered will blink here Base Station Selection, Automatic / Manual / Combined= Automatic registration is activated. . The 0 blinks Combined Selection of the Base Station Activate / Deactivate the Base Station Number Push the 0 to deactivate. Status at initializationDisplay of the base station here Multicell System Comfort Mobile Unit Register Comfort Mobile Unit on Multiple Base Stations Multicell System Comfort Mobile Unit Base Stations Selection Automatic / Manual / Combined Operation on Telephone Systems Standard Mobile Unit Thereafter Enter Main Trunk Code Hakz Setting is saved Every digit entered replaces one dash on the display Deleting AKZ and Hakz #!o AKZ / Hakz is / are deleted 25 §%Setting at initializ Then Set / Change Time for FlashSet the Time for F Seconds Operation on Telephone Systems Comfort Mobile Unit Enter the Trunk Code AKZ 12345u Operation on Telephone Systems Using the Features12345 12345u34567 You are engaged in a consultation call Example Setting Up a Consultation with Comfort Mobile UnitOr Switch the Call Terminate Consultation Acoustic Signalling General Information Tips for Troubleshooting Error Possible Cause What To Do Warranty Siemens Service Germany-wide telephone number 0180 5333Contact Partners Connection Configuration Glossary Park Unpark a Call StationTC System Index LED Hold 43, 95 Register Mobile unit Quick Reference Operating Instructions Standard Mobile Unit Dialing an External Telephone Number Setting Tone Ring PitchStandard Mobile Unit in Operation Accepting a Call Dialing an Internal Telephone Number Forwarding an External Call to an Internal Station Internal Consultation during an External CallExternal Consultation during an External Call Accepting a Call Waiting Call Setting the Handset Volume during a Call Quick Reference Operating Instructions Comfort Mobile Unit Setting the Tone Ring Volume Comfort Mobile Unit in Operation Accepting a CallDialing an Internal Telephone Numberpage Storing the Telephone Number and Name in the Telephone Book Dialing the Telephone Number from the Telephone Book Quick Reference Operating Instructions Auxiliary Device Toggle page 128 Telephone with Pulse Dialing Toggle page 128 Telephone with Tone Dialing Siemens Aktiengesellschaft