28.10.96

1054K09.FM

Gigaset 1054, GBR: A30852-X954-B101-1-7619

Multicell System

Standard Mobile Unit

 

 

Base Station Selection, Automatic / Manual / Combined

If you are using multiple base stations, you can stipulate which base station your mobile unit should use. The options are manual, automatic or combined search; the setting is carried out from the mobile unit in idle state.

1.Automatic Selection of the Base Station (Status at Initialization) The mobile unit establishes radio contact to a base station automatically

when it enters the radio range of a base station

in the case of “competing” base stations ( when radio cells overlap), it establishes con- tact with the base station which offers the optimum radio connection

Push these keys to initiate the procedure

Push the 0.

=Automatic registration is activated. . The “0” blinks.

Push enter.

w

01234

A C

01234

A C

2.Manual Selection of One Particular Base Station: The user stipulates which base station should be used;

this setting is recommended particularly in cases where radio cells overlap.

...

! $

w

Push these keys to initiate the procedure

Push the number of the base station you wish to select.

The number entered will blink; here, 1

Push enter.

01234

A C

01234

A C

3.Combined Selection of the Base Station:

The mobile unit first searches for 30 seconds for the base station stipulated by the user. If it cannot find it, then it searches for the base station which offers the optimum radio connection.

Push these keys to initiate the procedure

Enter the number of the base station

!which should be searched for first. Push that digit again to set combined

!search.

The 0, and here the 1, blink,

Push the enter key.

w

Note:

01234

A C

01234

A C

01234

A C

Only registered mobile units can be operated on a base station.

If the radio contact to a base station is lost or if the mobile unit is searching for a base sta- tion, the ready symbol blinks on the screen.

You can, in each case, be reached via the base station on which your mobile unit is regis- tered.

132

Page 138
Image 138
Siemens 1054 Base Station Selection, Automatic / Manual / Combined, = Automatic registration is activated. . The 0 blinks