Siemens 1054 operating instructions INT1

28.10.96

1054K07B.FM

Gigaset 1054, GBR: A30852-X954-B101-1-7619

Operation with Comfort Mobile Unit Charges, Call Length

ChargFactor-.--

Stipulate unit cost with decimal point.

Any time the unit cost is changed, the total charges are reset to zero.!

Thus, any change in the unit cost should only be carried out at the end of a billing period..

Charge factor

1.--

SAVE

ChargFactor---

Stipulate unit cost without decimal point.

Any time the unit cost is changed, the total charges are reset to zero.!

Thus, any change in the unit cost should only be carried out at the end of a billing period.

This display can also be used to display charges in a foreign currency..

Charge factor

---

OK

Seize displ. ON

Activate / deactivate charge display of the preceding call. (The charge display must be activated!)

If this feature is activated, then the charges for the preceding call are displayed after the line is seized. This is particularly useful, for example, in hotels or inns which wish to view a guest’s call charges. For resetting options for the call charges, see “Delete totals”

Charge display after seizuree activated

Total

View or delete individually the call charges per telephone line..

Using OK, the totals for both telephone lines can be displayed individually.

The last sum in the list is the total for both telephone lines.

Total	12.20
Ext1:
	DELETE
NEXT
Total charges
	123.50
	DELETE
NEXT

Total per unit

View or delete individually the total charges per registered mobile unit or connected aux- iliary device, i.e. per internal station.

INT1: 56.50

INT2: 4.30

NEXT DELETE

●If the unit cost is entered for the first time or changed, all previous individual and total entries are deleted.

●If you want to have the units displayed again, enter “0.00” as the new unit cost.

●The unit cost can be programmed for any number up to 9.99 or 999, and is then valid for all stations.

109