Siemens 1054 Set Connection Configuration for Internal Stations, Set Cordless Station Connections

28.10.96

1054K07C.FM

Gigaset 1054, GBR: A30852-X954-B101-1-7619

Operation with Comfort Mobile Unit System Settings

Set Connection Configuration for Internal Stations

You can stipulate which different types of devices are to be used at the different stations.

Cordless terminals can be mobile units or cordless connections such as Gigaset 1000TAE . For these stations, “mobile unit” is pre-set.

For non-cordless devices, the device type “Telephone” is set. Modems or fax machines should preferably be connected to station 0; a door interphone, however, can only be connected to sta- tion 9.

1.In idle state, push the ßkey and select “Service” from the main menu.

2.In the Service menu, select “System settings” and enter the system code. (see also page 115).

Equipment data

a/b line

After the correct system code has been entered, the following menu appears:

Scroll through the menu with NEXT ...

until “Equipment data” is in the 1st line; then select with OK.

Scroll through the menu with NEXT...

until “a/b line” is in the 1st line; then select with OK.

Sys cd/Mn sys cd

Duration/Units Call barring

NEXT OK

Autom. seizure

Call pickup Access rights

NEXT OK

Set Non-cordless Station Lines (a/b lines):

a/b line 0

Active:Telephone

New :Modem

New :Fax

New :Neutral

New :No funct.

- - - - - - - -

Choose one of the two auxiliary devices, using NEXT, and

select with OK ; here, “a/b line 0“.

The menu for the selection of the device type appears (entire menu at left).

Using NEXT, choose a device type and stipu- late it with SAVE; here, “FAX“.

Neutral signifies fax and telephone.

a/b line 0

a/b line 9 Internal 1

NEXT			OK
New	:Fax
New	:Neutral
New	:No funct.
NEXT		SAVE

Set Cordless Station Connections:

Internal 1

Act. :Mobileset New :Neutral New :Modem New :FAX

New :Telephone

- - - - - - - -

Scroll with NEXT ...

until, for example, “Internal 1” is in the first line ; then select with OK.

The menu to select the type of equipment appears (entire menu is at left).

Using NEXT, choose a device type and stipu- late it with SAVE; here, “Fax”

(FAX applies here to a fax machine connec- ted to a Gigaset 1000TAE).

Neutral signifies fax and telephone.

a/b line 0

a/b line 9 Internal 1

NEXT		OK
New	:FAX
New	:Telephone

- - - - - - - -

NEXT SAVE

116