28.10.96

1054K01.FM

Gigaset 1054,GBR: A30852-X954-B101-1-7619

Putting Into Service

Important Information

Dialing Mode

The factory setting on your telephone system is for “tone dialing.” In some cases, it might be necessary to change the setting to the old dialing mode of “pulse dialing.”

Instructions on how to determine and set the dialing mode are found on page 20 and on page 25.

Connection Cable

The connection cable included with the device is equipped with the TAE connection plug (TAE = Telephone Adaptor).

If the proper telephone adaptor jack (TAE) is not available at the installation site, it can be ordered from the German Telekom AG.

Use only original Siemens connection cables. Other cables may have a different configuration.

Power Supply Unit

The power supply unit included with the device is necessary for operation of your telephone sys- tem.

Telephone Systems

The telephone system is suitable for connection to telephone systems with signal key functions (consultation) “Flash” and “Ground.”

New Features for Telephone Service

Systems connected to a digital switching exchange of the German Telekom AG have access to a number of new features such as call waiting, call forwarding, lock and others.

If you want to take advantage of these features, please consult the German Telekom AG. Your Gigaset 1054 is equipped to accommodate these features.

7

Page 13
Image 13
Siemens 1054 operating instructions Putting Into Service