Push the digit key 1 or 2 or 3 or 4 and continue to hold it down. Stipulate the base station number with the digit keys 1 to 4.
Registration key

28.10.96

1054K09.FM

Gigaset 1054, GBR: A30852-X954-B101-1-7619

Multicell System

Standard Mobile Unit

 

 

Registering the Standard Mobile Unit on Multiple Base Stations

Up to 8 mobile units can be registered on one base station.

1.The mobile unit must be switched off If necessary, switch off by pushing

the u key until the display goes off.

2. Push the registration key on the base station.

For this, please use a sharp object (e.g. pencil, ballpoint pen). The registration key will begin to blink.

3. Then (within 1 minute) on the Mobile Unit:

!...$

uIn addition, hold the ON key down until the display appears.

Enter the system code.

oAt the time of initialization, the system code is set at 0000.

Complete the entry of the system code.

#

Please wait until the connection to the base station has been established.

All available internal station numbers appear on the display;

here, 1 to 8.

Enter the desired internal station num- !...( ber for the mobile unit, i.e. push one of

the digit keys -- 1 to 8; here, for example, 2

The mobile unit is registered on base station 1 with the internal station number 2.

1-

C

1---

C

1

C

12345678

A CD

-1-

C

Note:

If 8 mobile units are already registered, three dashes appear on the screen during the regis- tration procedure after the system code is entered, and a negative acknowledgment tone is signalled.

131

Page 137
Image 137
Siemens 1054 operating instructions Multicell System Standard Mobile Unit, Then within 1 minute on the Mobile Unit