28.11.961054K02.FMGigaset 1054, GBR: A30852-X954-B101-1-7619

Putting Into Service

Base Station Gigaset 1054

 

 

Tips for the Most Advantageous Installation of the Base Station

If you are using non-cordless telephones along with this cordless telephone, we recommend that you keep as great a distance as possible between the telephone and the base station in order to prevent humming (technical source) noises on the telephone.

Place the base station at the most central site possible within the range in which you want to be able to use the phone. For example:

in the hallway of your apartment,

in a centrally-located room of your house, office or apartment,

not in the basement,

not in the attic.

The base station should, if possible, be installed at an easily accessible site. For example:

in an open space in the room,

not in alcoves,

not behind metal doors, heavy furniture, metal cabinets,

not in places which are especially heavily shielded from radio waves by thick (steel) concrete walls or metal walls.

If you also want to be able to use the phone outside of the building, install the base station:

as near to window level as possible,

in a room facing your grounds.

Installation Site / Selection of the Mounting Site

In selecting the installation site, the following criteria should be taken into consideration:

1.The telephone connection cable must be long enough to reach the jack of your TAE connec- tor.

2.A 220/230 V electrical outlet must be available at the installation site for supply of power to the base station.

3.In order to prevent mutual interference, the installation site should not be in direct proximity to other devices such as, for example, a HiFi, office equipment or microwave appliances.

The base station is designed for operation in protected rooms with a temperature range of

0 to +50 °C. It should not, for example, be installed in the bathroom, laundry room, damp base- ment rooms or near heat sources, such as, for example, radiators. It should also not be installed at a site exposed to direct sunlight.

10

Page 16
Image 16
Siemens 1054 operating instructions Installation Site / Selection of the Mounting Site