142
Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96 1054K09.FM
Operation on Telephone Systems Comfort Mobile Unit
The Gigaset 1054 can be connected to telephone systems with tone dialing (DTMF) or pulse
dialing (DPS).
At the time of first start up on a telephone system, you must program a dialing timeout for the
through connection to the public network. By storing a trunk code, you stipulate this automatic
timeout which must occur before the telephone number is dialed.
All the trunk codes for your telephone system must be entered one after the other.
The following procedure is used to enter an automatic dialing timeout of 3 seconds.
Please also note the operating instructions for your telephone.
The 0 ... 9 keys as well as the star, pound and signal keys can be used for the trunk code (AKZ).
To set the different timeout lengths, see „Change Length of Timeout after AKZ / HAKZ“ on page
139.
1. In idle state, push the ßkey and select “Service” from the main menu.
2. In the Service menu, select “System settings” and enter the system code
(see page 115).
After the correct system code is entered,
the following display appears:
Select with OK.
Select with OK.
Scroll with NEXT to select “New entry” and
confirm with OK.
oEnter trunk code (AKZ); for example, 0,
and store with SAVE.
Note:
●The trunk code for “External 2“ is set accordingly.
●Where necessary, the HAKZ for “External 1” and “External 2” can be set in the same man-
ner.
General Information
Enter the Trunk Code (AKZ)
Sys cd/Mn sys cd
OK
Tel. no. lock
NEXT
Duration/Units
Sys cd/Mn sys cd
Sys cd for Ext 1
New entry
Sys cd for Ext 1
M sy cd for Ext 1
OKNEXT
Sys cd for Ext 2
No. List
New entry
OKNEXT
Delete number
Sys cd1 Ext 1:_
SAVE
SAVE