AXIS 223M - System Options 49
Plain Config - this function is for the advanced user with previous experience of configuring Axis cameras. All parameters can be set and modified from this page. Help is available via the links on the standard setup pages.
About
Third Party Software Licenses - click View licenses for a list of the licensed software used in the AXIS 223M Network Camera.
Resetting to the factory default settings
To reset the camera to the original factory default settings, go to the System Options > Maintenance web page (as described in Maintenance, on page 47) or use the Control button (see the illustration on page 6) as described below:
Using the Control Button
To reset the camera to the factory default settings using the Control Button:
1.Disconnect the power adapter, or the network cable if using PoE.
2.Press and hold the Control button while reconnecting power.
3.Keep the Control button pressed until the Status Indicator color changes to amber (which may take up to 15 seconds).
4.Release the Control button.
5.When the Status Indicator changes to Green (which may take up to 1 minute), the process is complete and the camera has been reset. The unit will now have the default IP address 192.168.0.90 if you are not using a DHCP server.
