| 75 |
Control System Menu |
SETUP PRESETS
1 Preset Volume | Yes | |||
2 | Preset | Names |
| Auto |
3 | Preset | Enter | Key | No |
when recalling a preset
volume changes to
preset level
↑↓ next item adjust ←→
MENU setup control
Presets Setup
Preset Volume
If set to YES, all of the presets you program will recall the volume setting saved in the preset.
If set to NO, (Default) none of the presets will change vol- ume when recalled. The volume will remain at the current setting.
Preset Names
If set to AUTO, (Default) the CT6 Receiver will auto generate a name according input and volume level.
If set to Manual, the user can rename the preset or retain the previous name.
Preset Enter Key
If set to NO, (default) when using the B&K Channel (Preset) Up and Channel (Preset) Down buttons, the ENTER button is not required for the preset to be recalled.
If set to YES, when using B&K Channel (Preset) Up and Channel (Preset) Down buttons, the ENTER button is required for the preset to be recalled.
Note: ENTER must be pressed after a preset is numerically selected.
Power On Titles
POWER ON TITLES
1 Power On Line 1
‘ | Multi Zone | ‘ | |
2 Power On Line 2 |
|
| |
‘ | Basic Operation ‘ | ||
| SEL edit name |
| |
↑↓ next item | adjust ←→ | ||
MENU setup control
1.Use the Up/Down keys to highlight either of the two Power On Title lines you want to edit. Then use the SEL or ENTER key to activate editing.
2.Once you see the blinking cursor, use Left/Right keys to move the cursor to the desired position.
3.Use the Up/Down keys to select a character. SEL or Enter key to save the new name. You may also use the numeric keys to aid in the naming process: 1=ABC, 2=DEF, etc....
4.Use the SEL or ENTER key to save the new title.
Power On Titles only appear on the front panel display of a CT610 or CT310 when any zone powers up. CT602/CT300 has no power on display.
B & K
