38
1
2
2
Hardware Zone Settings - Tab 1
1.Since a CT610/602 has six hardware zones, BKcSuite will display a zone button corresponding to each of the six zones. (If you are programming a CT310/300, three zone buttons appear). Select the zone you wish to adjust the settings of.
2.You may set Zone A to stereo or mono as required. When stereo is selected, the form will appear as shown to the left.
If mono is chosen, the Zone A form will change its appearance to the mono ver- sion as shown to the left.
The form displays new choices for the split mono zone. The right or left side may con- figured fixed or variable or may have vol- ume limits set. The changes made in the Hardware Zone setting Tab affect amp channels only.
B & K
S I M P LY B E T T E R !
