B&K CT602, CT600, CT310, CT610, CT300 user manual Setup Using the On Screen Display

62 Setup Using the On Screen Display

Setup Using the On Screen Display

	MAIN MENU
1	Zone Operation
2	Zone Favorite		Presets
3	Audio/Video	System		Setup
4	Control System Setup
5	Memory Backup/Restore
6	System Status
↑↓ next item			SEL select
	MENU exit menu system

It is possible to completely program the CT Receiver via the on-screen menus or the front panel dis- play. However, it is not nearly as fast and straightforward as using a PC and BKcSuite. Nevertheless, it is often convenient to touch up one or two parameters of the system using the on-screen or front panel menus. Please note that the CT602/300 does not have front panel buttons or a display. All on screen setup on a CT602/300 must be done through the zone A video output run to a monitor accessed by remote control. Remote control access to the on screen menu is limited to zone A only.

The on screen menu cannot be accessed by any zone other than zone A.

B & K

S I M P LY B E T T E R !