Axis Communications AXIS 223M user manual Video/Image problems general

AXIS 223M - Troubleshooting 57

Video/Image problems - general
	No images in browser	To enable the updating of video images in Microsoft Internet Explorer, set your browser
	(Internet Explorer for Windows only)	to allow ActiveX controls. Also, make sure that AXIS Media Control (AMC) component
		is installed on your workstation.
	Installation of additional ActiveX com-	Configure your camera to use a Java applet for updating the video images under
	ponent restricted or prohibited.	Live View Config > Layout > Default Viewer for Internet Explorer. See the online help
		for more information.
	Image too dark or too light.	Check the video image settings. See the online help on Video and Image Settings.
	Missing images in uploads.	This can occur when trying to use a larger image buffer than is actually available. Try
		lowering the frame rate or the upload period.
	Slow image update.	Configuring, pre-buffers, motion detection, high-resolution images, and high frame
		rates will reduce the performance of the camera.
	Poor performance.	Poor performance may be caused by heavy network traffic, multiple users accessing the
		unit, low performance clients, use of features such as Motion Detection, Event han-
		dling, Image rotation other than 180 degrees.
	Image gradually gets darker or lighter.	When using the camera in locations lit by fluorescent lighting, check in the advanced
		image settings that the Exposure control is set to Flicker-free.
	Image loses focus often.	Disable the DC-Iris lens in the settings for Video & Image > Advanced. Focus the cam-
		era following the instructions on page 9, and then enable the DC-Iris lens.
	Images only shown in black & white.	Check the color level setting.
		Check the setting for the IR cut filter. Images are shown in color only when this filter is
		enabled, i.e. when set to yes or auto.
	Blurred images.	Refocus the camera. Check in the Video & Image > Advanced - Camera Settings that
		DC-Iris is set to Enabled. If the images are still blurred adjust the metal ring until the
		image is sharp, see Removing and attaching the lens, on page 59.
	Rolling dark bands or flickering in	Try adjusting the Flicker-free exposure setting under advanced image settings. Note
	image.	that the 'Hold Current'/Manual setting may cause unwanted effects.
	Video/image problems - MPEG-4
	Lower frame rate than expected.	Check with the administrator that there is enough bandwidth available. Check also the
		settings for bit rate control, in the Video & Image > Advanced > MPEG-4settings.
		Using an inappropriate video object type can also affect the frame rate. See the online
		help for more information.
		Check in the AMC control panel applet (MPEG-4 tab) that video processing is not set to
		Decode only I frames.
		Lower the image resolution.
		Reduce the number of applications running on the client computer.
	No MPEG-4 displayed in the	Check that the correct network interface is selected in the AMC control panel applet
	client.	(network tab).
		Check that the relevant MPEG-4 connection methods are enabled in the AMC control
		panel applet (network tab).
		In the AMC control applet, select the MPEG-4 tab and click the button Set to default
		MPEG-4 decoder.
	No multicast MPEG-4 displayed in the	Check with your network administrator that the multicast addresses used by the
	client.	AXIS 223M are valid for your network.
	Multicast MPEG-4 only accessible by	Check if your router supports multicasting, or if the router settings between the client
	local clients.	and the server need to be configured. The TTL (Time To Live) value may need to be
		increased.