Repairing the Diaphragm Valve

Repair

NOTE: The diaphragm (17C127 – EQ300, 17C128

–EQ600) can be replaced without removing the assembly from the panel. You will need an 8 mm Allen wrench for the EQ600S and a 6 mm for the

EQ300S.

1.Perform the Pressure Relief Procedure, page 8 .

2.Loosen all 4 Allen-head cap-bolts evenly and then remove them completely while supporting the canister of the diaphragm valve.

3.Replace the diaphragm (natural rubber compound) and hand-tighten it as far as possible to establish the alignment with the canister.

NOTE: There are two shims between the diaphragm and the actuator. Keep the shims and reuse them (they do not come with the replacement diaphragm). Do not cause any pre-load or torque on the diaphragm by over-tightening it in a misaligned position.

4.Insert all 4 Allen-head cap bolts but do not tighten them.

5.Apply more than 80 psi (5.5 Bar, MPa) air pressure to the regulator inlet to cause the piston to retract.

6.With the piston retracted, hand-tighten the 4 Allen-head cap bolts.

7.Release the air pressure.

8.Tighten the cap-bolts in an alternating pattern (see image below) to 80 +/- 8 in-lb (9 +/- 0.9 N•m). This will cause a slight bulge in the diaphragm between the canister and the stainless steel casting.

1 3

9.Test and confirm that the unit is working properly.

NOTE: This can be done using only water to charge the equipment – there is no need to use abrasive for this test.

334666B

ti25442a specifications

The Graco TI25442A is a state-of-the-art paint sprayer designed for both professionals and DIY enthusiasts looking to achieve a flawless finish on various projects. This versatile tool is specifically engineered for residential and commercial applications, providing an exceptional solution for painting walls, ceilings, furniture, and more.

One of the standout features of the Graco TI25442A is its powerful airless spraying technology. This ensures a high-pressure output, allowing for a smooth and even application of paint without the need for thinning. The sprayer is capable of handling a variety of coatings, including stains, primers, and latex paints, making it a multifaceted addition to any toolbox.

Another defining characteristic of the TI25442A is its adjustable pressure control. This feature allows users to easily modify the spray pressure to suit different project needs, providing better control and precision. Whether you’re tackling intricate details or larger surfaces, this sprayer is flexible enough to accommodate various painting techniques.

The Graco TI25442A also boasts a durability-focused design. It is built with high-quality materials that enhance its longevity, ensuring that it can withstand the rigors of frequent use. The sprayer is also equipped with a stainless-steel piston pump, which provides superior performance and reliability over time.

Ease of maintenance is another highlight of this model. The sprayer features a user-friendly design, making it simple to clean and maintain after each use. The built-in filter helps prevent clogs, allowing for a hassle-free spraying experience.

Additionally, the TI25442A comes with a robust hose that offers ample length for maneuverability during projects. This feature is particularly beneficial for larger areas, as it reduces the need for constant repositioning of the sprayer.

In conclusion, the Graco TI25442A is a powerful and versatile airless paint sprayer that combines advanced technology with user-friendly features. Its adjustable pressure control, durable construction, and ease of maintenance make it an excellent choice for anyone looking to achieve professional-quality results in their painting projects. This sprayer is a reliable tool that stands out in the competitive market of paint application equipment.

Graco ti25442a manual Repairing the Diaphragm Valve, Perform the Pressure Relief Procedure

Models: ti25442a