Maintenance

1.Always stop the pump at the bottom of its stroke when you take a break and at the end of the day. This helps keep fluid from drying on the rod and damaging the packings.

2.Keep the displacement pump packing nut/wet cup 1/3 full of TSL at all times. The TSL helps protect the packings and rod.

3.Check the tightness of the packing nut daily. It should be tight enough to stop leakage but no tighter.

CAUTION

Proper engine and hydraulic oil level is important to prevent costly damage to the sprayer. Check it as often as recommended in Steps 4 and 5., below.

4.Check the hydraulic oil level weekly. The oil must be up to the top mark on the dipstick. Use only Graco Hydraulic Oil.

5.Check the engine oil level at least weekly. The oil must be up to the FULL mark on the dipstick. The engine should not use more than one ounce of oil per hour of operation. Consult the engine manual, supplied, for additional recommended maintenance.

6.Inspect the return line filter frequently for clog- ging. Replace it after every 500 hours of operation or every 6 months, whichever comes first. A clogged or worn out filter reduces filter capability and will damage the hydraulic pump.

7.Change the hydraulic oil after every 2000 hours of operation or every 12 months, whichever comes first. For continuous operation in tempera- tures above 85_F (30_C), change the oil after every 1000 hours or 6 months of use. See Step 9. for the procedure.

CAUTION

Cleanliness is essential when servicing the hydraulic system. Use special care to avoid getting dust or dirt into the hydraulic system to prevent damage to the hydraulic components.

8.Change engine oil and filter every 100 hour of use. Use 30W detergent oil.

9.To change the hydraulic oil:

a.Follow the Pressure Relief Procedure Warning on page 10.

b.Place a waste container under the drain plug of the hydraulic reservoir. See Fig 7. Unscrew the plug and drain the reservoir. Reinstall the plug before proceeding.

c.Remove the nuts and reservoir cover.

d.Remove the return line filter and install a new filter assembly.

e.Inspect the inlet filter and replace it if needed.

f.Install the reservoir cover and nuts. Then pour in five gallons (19 liters) of Graco Hydraulic Oil through the intake filter. See Fig 7. Install the fill cap.

 

NUTS

 

HYDRAULIC

COVER

ENGINE

OIL FILL CAP

 

OIL

 

 

 

INLET

FILL PLUG

 

FILTER

 

RETURN

 

LINE

HYDRAULIC OIL

FILTER

DRAIN

 

 

 

 

PLUG LOCATED

 

 

UNDER RESERVOIR

Fig 7

 

 

12 307616

Page 11 Page 13
Page 12
Image 12
Graco Inc 230975, 231733, GH 733 important safety instructions Maintenance
Page 11 Page 13

230975, 231733, GH 733 specifications

Graco Inc. is widely recognized for its innovative fluid handling products and diverse range of equipment designed for various applications. Among its product lineup, the Graco GH 733 is a standout piece of machinery, particularly known for its performance in high-demand environments. The model number 231733 refers to a specific configuration of the GH 733, and 230975 points to another variant, showcasing Graco's commitment to customization and versatility in their offerings.

One of the main features of the Graco GH 733 is its powerful engine, designed to deliver efficient performance even in the most challenging conditions. The machine boasts a robust hydraulic system that facilitates the movement of fluids at high pressures, making it ideal for applications such as painting, coating, and other fluid dispensing tasks. This ensures that users can achieve superior results with precision and speed.

The GH 733 is equipped with advanced technologies that enhance usability and functionality. For example, it incorporates an electric start feature, reducing the hassle of manual cranking and enabling quick operation. Moreover, Graco has designed this model with an intuitive control panel that allows users to easily adjust settings and monitor performance, reducing the learning curve for new operators.

Another critical characteristic of the GH 733 is its portability. The unit is designed with features such as sturdy wheels and a compact frame, which allow it to be easily transported across job sites. This mobility is particularly beneficial in construction and industrial environments, where equipment needs to be moved frequently.

Durability is a cornerstone of the Graco GH 733 design. Constructed from high-quality materials, the machine is built to withstand the rigors of demanding work environments. Graco's commitment to quality ensures that users receive a reliable product that minimizes downtime and maintenance costs.

In summary, the Graco GH 733, along with its configurations like 231733 and 230975, exemplifies efficient design and advanced technology. With a focus on performance, ease of use, portability, and durability, it meets the needs of professionals looking for high-quality fluid handling solutions. The combination of these features makes the GH 733 a preferred choice for many applications across various industries. Whether for large-scale projects or detailed work, this equipment stands out as a testament to Graco's engineering excellence.
Top Page Image Contents