Setup
3.Check the Hydraulic Oil Level
a.Unscrew the hydraulic oil fill cap. See Fig 2. The dipstick is attached to the cap. The oil should be up to the full line on the dipstick.
CAUTION
To prevent damage to the cooling system and hydraulic pump, use only Graco Hydraulic Oil, 169236 (5 gal./20 liter) or 207428 (1 gal/3.8 liter). Other types of hydraulic oil may damage the hydrau- lic components.
b.Add oil as needed to the proper level. A completely full hydraulic system contains about 5 gallons (20 liters) of oil.
HYDRAULIC OIL
PACKINGFILL CAP NUT/ WET
CUP
Fig 2 | 7871b |
GASOLINE
FILL CAP
OIL DIPSTICK
ENGINE OIL
FILL PLUG
7872b
Fig 3
4.Check the Engine Oil Level
a.Remove the dipstick. See Fig 3.
b.Check to be sure the oil is up to the full mark on the dipstick.
c.If oil is needed, see the chart below for the recommended oil type and weight.
d.Crank case capacity with filter: 2.1 quarts (2.0 liters)
RECOMMENDED LUBRICATION OIL: Use a high quality detergent oil of American Petroleum Institute (API) service class SG or SH for regular use and for breaking in a new engine.
GRADE OF OIL CHART
SEASON OR TEMPERATURE | GRADE OF OIL |
|
|
Spring, Summer, Autumn | SAE |
|
|
30_F to 0_, Winter | SAE |
|
|
6 307616
