SERVICE
Disc Regulator O)Ring Replacement | KEY |
|
|
|
|
| 1 | Gun ody |
| 87 | O:Ring |
. Unscrew the turbine air line from the adapter 6. | Regulator isk | 88 | ir Valve | ||
See Fig 22. | 3 | ||||
85 |
| 89 | Washer | ||
|
| ||||
| 86 | dapter |
| 90 | ap Screw |
2. Remove the cap screw and washer from |
|
|
|
| |
the gun body . |
| 6 |
|
|
|
|
|
|
|
| |
3. Pull the adapter 6 with the air valve out of | 3 |
| |||
the gun body. |
|
|
|
| |
| ||
. Unscrew the adapter 6 from the air valve |
| |
|
| |
and remove the disk regulator 3. |
|
|
. lean and inspect parts for wear or damage and replace if necessary.
6.lean and inspect the two o:rings and one o: ring on the air valve. Replace if necessary. Lu: bricate the o:rings with petroleum jelly.
. Install the disc regulator 3 into the air valve so its beveled surface faces into the gun.
. Screw the adapter 6 into the air valve and
install the air valve into the gun body . | Fig 22 |
|
. Screw the cap screw with the washer into
the gun body .
KEY
. Screw the turbine air line onto the adapter 6.1 | Gun ody |
|
76 | Muffler |
|
77 | Elbow |
|
78 | Tube |
Muffler Replacement
. Remove the fan air valve assembly as instructed in Fan Air Valve Replacement.
2.Remove the elbow 6 with the tube from the gun body . See Fig 23.
3.With a hook remove the muffler from the gun body and replace with a new muffler.
. Install the elbow 6 in the gun body.
. Install the fan air valve assembly as instructedFan in Air Valve Replacement.
6
Fig 23
