Graco Inc 800-345, 4040 manual Installingand Changing Spraylips, 308-522

Installingand Changing Spraylips

WARNING

To reduce therisk of serious bodily injury, including fluid injection or splashing inthe eyes orontotheskin,useextremecautionwhen

changingspraytips. ALWAYS follow the procedure below.

1.Follow the Pressure Rellet Procedure.

2.Pointthegunandwandaway from yourselfand anyone else.

3.Without holding your handoverthespray tip (A), pull back the quick coupler ring(B), remove thetip and then release the ring.See Figure 3.

4.Be surethe tip is securebeforestartingtospray again.

5.Tip holding holes are provided on the chassis.

CAUTION

To avoid blowing theO-ring out of the qulck coupler, dueto the high pressureinthe system, never operatethe pressure washer withouta tip securely mounted in the quick coupler.

Figure 3

308-522 7