Graco Inc 800-345, 4040 manual Terms, 4308-522, Hose Safety, Moving Parts Hazard

Models: 4040 800-345 308-522

1 19
Download 19 pages 60.35 Kb
Page 4
Image 4
HOSE SAFETY

HOSE SAFETY

Highpressurefluid inthe hoses canbe very dangerous. Ifthe hose develops aleak, split or rupture dueto any kind of wear, damage or misuse,the high pressure spray emittedfrom it can causefluida injectioninjuryor other seriousbodily injury or property damage.

ALL FLUID HOSES MUST HAVE STRAIN RELIEFSON BOTH ENDS. The strain reliefs help protect the hose from kinks or bends at or close to the coupling, which can resultin hose rupture.

TlGHTEN all fluid connectionssecurelybefore each 'use. High pressurefluid can dislodge a loose coupling or allow high pressure spray to be emitted fromthe coupling.

NNER use a damaged hose. Beforeeach use, check entire hose forcuts, leaks, abrasion,bulgingcover, or damage or movement of thehose couplings. If any of these condRions exist, replace the hose immediately. DO NOT try to recouple high pressure hose or mend it with tape or any other device.A repaired hose cannot contain thehigh pressure fluid.

HANDLEANDROUTEHOSES CAREFULLY Do notpull onhosestomovethepressure washer. Do not use chemicals which are not compatible wlth innerthe tube and cover of the hoseDO. NOT expose Gracohoseto temperatwes above 2M)" F (93' G)M below -40'F

( - 400 C).

MOVING PARTS HAZARD

Moving partscan pinch oramputatefingersorother

body parts. KEEP CLEAR ofmoving parts when starting or operating the pressurewasher.

NNER operate the pressurewasher withoutall guards and interlocks installed andfunctioning.Followthe

PressureRelletProcedure before checking or servicing the pressurewasher to prevent discharging high pressure fluid from the gun.

TERMS

WARNING or DANGER Alertsuser to avoid or correct

NOTE Identifieshelpfulproceduresand information.

conditions that could cause bodily injury.

 

CAUTION Alertsuser to avoid or correct conditions

 

that could cause damageto the equipment.

 

IMPORTANT

United States Government safety standards have beenadopted under the Occupational Safetyand HealthAct. These standards-particularly theGeneralStandards,Part1910, and the Construction Standards, Part 1926-should be consulted.

4308-522

Page 4
Image 4
Graco Inc 800-345, 4040 manual Terms, 4308-522, Hose Safety, Moving Parts Hazard