Warnings
Warning Symbol
WARNING
This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions.
Caution Symbol
CAUTION
This symbol alerts you to the possibility of damage to or destruction of equipment if you do not follow the instructions.
WARNING
EQUIPMENT MISUSE HAZARD
Any misuse of the equipment or accessories, such as overpressurizing, modifying parts, using INSTRUCTIONS incompatible chemicals and fluids, or using worn or damaged parts, can cause them to rupture and
result in splashing in the eyes or on the skin, other serious injury, or fire, explosion or property dam- age.
DThis equipment is for professional use only. Observe all warnings. Read and understand all instruction manuals, warning labels, and tags before you operate the equipment.
DNever alter or modify any part of this equipment; doing so could cause it to malfunction. Use only genuine Graco parts and accessories.
DCheck all equipment regularly and repair or replace worn or damaged parts immediately.
DNever exceed the recommended working pressure or the maximum air inlet pressure stated on your pump or in the Technical Data on page 24.
DDo not exceed the maximum working pressure of the lowest rated component in your system. This equipment has a 120 psi (0.8 MPa, 8 bar) maximum working pressure at 120 psi (0.8 MPa, 8 bar) maximum incoming air pressure.
DBe sure that all fluids and solvents used are chemically compatible with the wetted parts shown in the Technical Data on page 24. Always read the manufacturer’s literature before you use fluid or solvent in the pump.
DNever move or lift a pump under pressure. If dropped, the fluid section may rupture. Always follow the Pressure Relief Procedure on page 9 before you move or lift the pump.
DThe pump weighs approximately 150 lb (68 kg) If it must be moved, use the lift ring, or have two people lift the pump by grasping the outlet manifold.
