Manuals / Brands / Power Tools / Paint Sprayer / Graco Inc / Power Tools / Paint Sprayer

Graco Inc 244592, 309298J, PRO Auto Xs AA, TI1713A Install the Gun and Mounting Bracket

1 56

Download 56 pages, 1.32 Mb

Installation

12 309298J

Install the Gun and Mounting Bracket

1. Loosen the mounting bracket’s two set screws (103)

and slide the bracket (102) onto a 1/2 in. (13 mm)

mounting rod. See FIG. 4..

2. Position the gun and tighten the two set screws.

For added positioning reliability, insert a 1/8 in. (3 mm)

locating pin into the slot (NN) in the bracket and through

a hole in the rod. See the detail in FIG. 4..

Fig. 4. Mounting Bracket

TI1738A

103

102 NN

9.24 in

(234.7 mm)

2.88 in

(73.2 mm)

Nozzle

Tip

Contents

Main Instructions/Parts List AUTOMATIC ELECTROSTATIC AIR-ASSISTED SPRAY GUN PRO Auto Xs AA 309298J Part No. 244592, Series A Table of Contents Symbols Warning Symbol Caution Symbol WARNING CAUTION WARNI NG Skin Injection Hazard Toxic Fluid Hazard Equipment Misuse Hazard Introduction How the Electrostatic AA Spray Gun Works Operating the Spray Function Operating the Electrostatics Gun Features and Options Changing the kV Setting Table 1: KV1 and KV2 Switch Settings Page Installation Install the System Ventilate the Spray Booth Warning Signs Page Install the Air Line Accessories Install the Fluid Line Accessories Install the Gun and Mounting Bracket Connect the Air and Fluid Lines Manifold Connections Optional Fiber Optic Cable Connection Grounding Check Electrical Grounding Check Fluid Resistivity Check Fluid Viscosity Install the Fabric Cover Operation Pressure Relief Procedure Operating Checklist Select a Spray Tip Install the Spray Tip Set the Atomization Fluid Pressure Adjust the Electrostatics Table 2: Dynamic Turbine Air Pressures Spraying Triggering the Fluid Alone Shutdown Maintenance Daily Care and Cleaning Daily Care and Cleaning, continued Flush the Spray Gun Clean the Spray Gun Equipment Needed Procedure Page Check for Fluid Leakage Electrical Tests Test Gun Resistance Test Power Supply Resistance Test Barrel Resistance Troubleshooting Spray Pattern Troubleshooting Gun Operation Troubleshooting Electrical Troubleshooting Repair Prepare the Gun for Service Remove the Gun from the Manifold Install the Gun on the Manifold Tip Guard, Air Cap, Spray Tip, or Seat Housing Replacement Page Electrode Replacement Fluid Tube Replacement Fluid Filter Removal Fluid Needle Replacement Piston Repair Table 3: Piston O-Rings Adjust the Actuator Arm Barrel Removal TI1732A Barrel Installation Power Supply Removal and Replacement Turbine Alternator Removal and Replacement Parts Parts 309298J 49 Part No. 244592 PRO Auto Xs AA Electrostatic Gun, Series A Parts 50 309298J Part No. 244843 Manifold, Series A, for standard and high conductivity coatings Included in repair kit 15D592. Spray Tip Selection Chart Accessories Gun Accessories Air Line Accessories Fluid Line Accessories Miscellaneous Accessories Page Page Technical Data Graco Standard Warranty Graco Information