Operation, Pressure Relief Procedure | Graco Inc TI1713A, 309298J

Operation

Pressure Relief Procedure

WARNING

Skin Injection Hazard

The system pressure must be manually

relieved to prevent the system from starting or spraying accidentally. Fluid under high

pressure can be injected through the skin and cause serious injury. To reduce the risk of an injury from fluid injection, splashing fluid, or electric shock, follow the Pressure Relief Procedure whenever you:

•are instructed to relieve the pressure

•stop spraying

•check or service any of the system equipment

•or install or clean the spray tip.

1.Turn off all the air to the spray gun except the cylin- der air, which triggers the gun.

2.Turn off the fluid supply to the gun.

3.Trigger the gun into a grounded metal waste con- tainer to relieve the fluid pressure.

4.Open the pump drain valve and all other drain valves in the system, having a waste container ready to catch the drainage. Triggering the gun to relieve pressure may not be sufficient. Leave the drain valve open until you are ready to spray again

5.Relieve fluid pressure in the fluid supply equipment as instructed in its instruction manual.

6.Close the bleed-type master air valve on the main air supply line to shut off the air. Leave the valve closed until you are ready to spray again.

7.If you suspect that the spray tip or hose is still clogged or that pressure is not fully relieved after fol- lowing the steps above, very slowly loosen the hose end coupling and relieve pressure gradually, then loosen completely. Now clear the tip or hose obstruction.

Operating Checklist

Check the following list daily, before operating the sys- tem, to help ensure you of safe, efficient operation.

All operators are properly trained to safely operate an automatic electrostatic air-assisted spray system as instructed in this manual.

All operators are trained in the Pressure

Relief Procedure at left.

The warning sign provided with the gun is mounted in the spray area where it can be easily seen and read by all operators.

The system, the operator, and all persons entering the spray area are properly grounded. See Grounding on page 15.

The condition of the gun’s electrical compo- nents has been checked as instructed in Elec- trical Tests on page 29.

Ventilation fans are operating properly.

Workpiece hangers are clean and grounded.

All debris, including flammable fluids and rags, is removed from the spray area.

All flammable fluids in the spray booth are in approved, grounded containers.

All conductive objects in the spray area are electrically grounded. The floor of the spray area is electrically conductive and grounded.

The manifold exhaust tubes have been checked for the presence of any fluid. See Check for Fluid Leakage on page 28.

309298J

244592, PRO Auto Xs AA, TI1713A, 309298J specifications

Graco Inc is a renowned brand in the field of fluid handling systems and accessories, with a reputation for delivering high-quality products that serve a variety of industries, including automotive, construction, and manufacturing. Among their extensive lineup, the Graco 309298J, TI1713A, PRO Auto Xs AA, 244592 represents a significant advancement in spray technology, notably regarded for its efficiency and versatility.

The Graco 309298J model is a part of the PRO Auto Xs series, designed specifically for high-performance spray applications. One of the standout features of this equipment is its auto-adjusting technology, which automatically adapts the spray pattern based on the surface being coated. This ensures uniform coverage and reduces the waste of material, making it an environmentally friendly option.

Equipped with an ergonomic design, the PRO Auto Xs AA enhances user comfort and reduces fatigue during prolonged use. The lightweight construction makes it easy to handle, while the balanced design allows for precise control, ensuring that even intricate spray patterns can be achieved with minimal effort.

Technologically, this spray gun incorporates advanced fluid dynamics that allow it to produce fine atomization, resulting in a superior finish. The easy-to-clean design coupled with a durable construction ensures that maintenance is straightforward, which is crucial for professionals who require reliability under demanding conditions.

Another notable characteristic is the Graco TI1713A tip, which is compatible with a variety of coatings, including paint, stains, and sealers. This versatility allows users to switch seamlessly between different materials without the need for extensive reconfiguration. The adjustability of the spray width further adds to its functionality, enabling operators to customize the application based on the job requirements.

Additionally, the 244592 model is designed with safety features, such as anti-drip mechanisms and pressure control valves, ensuring safe operation. Graco's commitment to quality is evident in the durability of its products, as they withstand the rigors of daily use while delivering consistent performance over time.

In summary, the Graco 309298J Pro Auto Xs AA, 244592 is a sophisticated spray solution that showcases the fusion of advanced technology and user-centric design, catering to professionals seeking efficiency, versatility, and reliability in their spray applications. This model stands out as an essential tool for anyone looking to enhance their workflow and achieve exceptional finish quality.

Graco Inc TI1713A, 309298J, 244592 Operation, Pressure Relief Procedure, Operating Checklist

Models: 244592 PRO Auto Xs AA TI1713A 309298J