screws
(2) 1/4” hex drive
Burner Maintenance
Burner Cleaning Procedure (cont’d)
Step 5. Remove the (4) 1/4” hex drive screws holding the right side inner door in place.
(4) 1/4” hex drive
screws
Step 6. Remove the (3) 1/4” hex drive screws holding the left side burner door in place.
(3) 1/4” hex drive screws
Step 7. Disconnect the pilot tube using a 7/16” wrench and the main burner feedline with a 3/4” wrench from the gas control.
Pilot and main
feedlines
Step 8. Disconnect the spark igniter/flame sensor wire from gas control.
Gas control
Spark igniter/flame
sensor wire
Right side inner door
Left side
burner door
Step 9. Remove the burner assembly from the com- bustion chamber.
Burner assembly
Step 10. Remove manifold mount from burner inner door
by removing (2) 1/4” hex drive screws.
Page 21
21
