Inner Door Removal
Step 8. To resume operation, follow the instructions located on the water heater lighting instruction label. Or, use the lighting instructions located
in the water heater installation and operating manual.
Inner Door Removal Procedure
Gas control power
switch
Step 1. Move the gas control power switch to the “OFF” po- sition.
Blower (water
heater) power cord
Step 2. Unplug the water heater from the wall outlet.
Outer door
Step 3. Remove the outer door.
(4) 1/4” hex drive
screws
Step 4. Remove (4) 1/4” hex drive screws from the right side inner door.
(3) 1/4” hex drive screws
Right side inner door
Step 5. Remove (3) 1/4” drive screws from the left side burner door.
Connectors attached to resettable thermal switch
Page 46
46
