Repair

Fluid Tube Replacement

There are no replaceable parts in the fluid tube assem- bly. Only remove when necessary.

1.Prepare the gun for service, page 35.

2.Remove the air cap assembly, page 37. Remove the shroud (2).

3.Disconnect the bottom fluid tube nut (C). See FIG. 26..

4.Carefully unscrew the top fluid tube nut (D).

C

20

E

D

ti1524a

Fig. 26. Fluid Tube Replacement

CAUTION

Be careful not to damage the fluid tube assembly (19) when cleaning or installing it, especially the sealing surface (E). If the sealing surface is damaged, the entire fluid tube assembly must be replaced.

5.Apply Part No. 116553 dielectric grease to the entire length of the plastic extension on the end of the fluid tube (19).

6.Apply low strength thread sealant to the fluid tube nut threads.

7.Install the fluid tube into the gun barrel and tighten the top nut (D) hand-tight, then 1/4 to 1/2 turn with a wrench. There will be a gap between the nut and barrel. Do not overtighten the nut.

8.Make sure the fluid filter (20) is in place. Tighten the bottom nut (C) onto the fitting (22) and torque to

20-30 in-lb (2.3-3.4 N•m). Make sure the top nut remains tight.

9.Reinstall the shroud and air cap assembly, page 37.

10.Test gun resistance, page 29.

Fluid Filter Removal

1.Prepare the gun for service, page 35.

2.Remove the air cap assembly, page 37. Remove the shroud (2).

3.Disconnect the bottom fluid tube nut (C).

4.Remove the fluid filter (20). Clean or replace the fil- ter, as needed.

Replacement filters are available in 100 mesh (stan- dard) or 60 mesh sizes. See page 52.

5.Install the fluid filter. Tighten the bottom nut (C) onto the fitting (22) and torque to 20-30 in-lb (2.3-3.4 N•m). Make sure the top nut (D) remains tight.

CAUTION

Be sure the fluid tube (19) is not twisted after tighten- ing the bottom nut (C).

6.Reinstall the shroud and air cap assembly, page 37.

7.Test gun resistance, page 29.

40

309298J

Page 40
Image 40
Graco Inc 309298J, 244592, TI1713A, PRO Auto Xs AA important safety instructions Fluid Tube Replacement, Fluid Filter Removal

244592, PRO Auto Xs AA, TI1713A, 309298J specifications

Graco Inc is a renowned brand in the field of fluid handling systems and accessories, with a reputation for delivering high-quality products that serve a variety of industries, including automotive, construction, and manufacturing. Among their extensive lineup, the Graco 309298J, TI1713A, PRO Auto Xs AA, 244592 represents a significant advancement in spray technology, notably regarded for its efficiency and versatility.

The Graco 309298J model is a part of the PRO Auto Xs series, designed specifically for high-performance spray applications. One of the standout features of this equipment is its auto-adjusting technology, which automatically adapts the spray pattern based on the surface being coated. This ensures uniform coverage and reduces the waste of material, making it an environmentally friendly option.

Equipped with an ergonomic design, the PRO Auto Xs AA enhances user comfort and reduces fatigue during prolonged use. The lightweight construction makes it easy to handle, while the balanced design allows for precise control, ensuring that even intricate spray patterns can be achieved with minimal effort.

Technologically, this spray gun incorporates advanced fluid dynamics that allow it to produce fine atomization, resulting in a superior finish. The easy-to-clean design coupled with a durable construction ensures that maintenance is straightforward, which is crucial for professionals who require reliability under demanding conditions.

Another notable characteristic is the Graco TI1713A tip, which is compatible with a variety of coatings, including paint, stains, and sealers. This versatility allows users to switch seamlessly between different materials without the need for extensive reconfiguration. The adjustability of the spray width further adds to its functionality, enabling operators to customize the application based on the job requirements.

Additionally, the 244592 model is designed with safety features, such as anti-drip mechanisms and pressure control valves, ensuring safe operation. Graco's commitment to quality is evident in the durability of its products, as they withstand the rigors of daily use while delivering consistent performance over time.

In summary, the Graco 309298J Pro Auto Xs AA, 244592 is a sophisticated spray solution that showcases the fusion of advanced technology and user-centric design, catering to professionals seeking efficiency, versatility, and reliability in their spray applications. This model stands out as an essential tool for anyone looking to enhance their workflow and achieve exceptional finish quality.