Manuals / Brands / Power Tools / Paint Sprayer / Graco Inc / Power Tools / Paint Sprayer

Graco Inc 244592, 309298J, PRO Auto Xs AA, TI1713A Barrel Removal

1 56

Download 56 pages, 1.32 Mb

Repair

44 309298J

Barrel Removal

1. Prepare the gun for service, page 35.

2. Remove the air cap, page 37. Remove the gun

shroud (2).

3. Disconnect the fluid tube nut (C).

4. Remove the jam nut (28) and actuator arm (29). See

page 42.

5. Loosen the three screws (10, 33). See FIG. 33..

6. Hold the gun body (32) with one hand and pull the

barrel (6) straight off the body. See FIG. 33..

Fig. 33. Barrel Removal

Fig. 34. Disconnect Fluid Tube

CAUTION

To avoid damaging the power supply (12), pull the

gun barrel (6) straight away from the gun body (32). If

necessary, gently move the gun barrel from side to

side to free it from the gun body.

TI1728A

TI1732A

30 19

Contents

Main Instructions/Parts List AUTOMATIC ELECTROSTATIC AIR-ASSISTED SPRAY GUN PRO Auto Xs AA 309298J Part No. 244592, Series A Table of Contents Symbols Warning Symbol Caution Symbol WARNING CAUTION WARNI NG Skin Injection Hazard Toxic Fluid Hazard Equipment Misuse Hazard Introduction How the Electrostatic AA Spray Gun Works Operating the Spray Function Operating the Electrostatics Gun Features and Options Changing the kV Setting Table 1: KV1 and KV2 Switch Settings Page Installation Install the System Ventilate the Spray Booth Warning Signs Page Install the Air Line Accessories Install the Fluid Line Accessories Install the Gun and Mounting Bracket Connect the Air and Fluid Lines Manifold Connections Optional Fiber Optic Cable Connection Grounding Check Electrical Grounding Check Fluid Resistivity Check Fluid Viscosity Install the Fabric Cover Operation Pressure Relief Procedure Operating Checklist Select a Spray Tip Install the Spray Tip Set the Atomization Fluid Pressure Adjust the Electrostatics Table 2: Dynamic Turbine Air Pressures Spraying Triggering the Fluid Alone Shutdown Maintenance Daily Care and Cleaning Daily Care and Cleaning, continued Flush the Spray Gun Clean the Spray Gun Equipment Needed Procedure Page Check for Fluid Leakage Electrical Tests Test Gun Resistance Test Power Supply Resistance Test Barrel Resistance Troubleshooting Spray Pattern Troubleshooting Gun Operation Troubleshooting Electrical Troubleshooting Repair Prepare the Gun for Service Remove the Gun from the Manifold Install the Gun on the Manifold Tip Guard, Air Cap, Spray Tip, or Seat Housing Replacement Page Electrode Replacement Fluid Tube Replacement Fluid Filter Removal Fluid Needle Replacement Piston Repair Table 3: Piston O-Rings Adjust the Actuator Arm Barrel Removal TI1732A Barrel Installation Power Supply Removal and Replacement Turbine Alternator Removal and Replacement Parts Parts 309298J 49 Part No. 244592 PRO Auto Xs AA Electrostatic Gun, Series A Parts 50 309298J Part No. 244843 Manifold, Series A, for standard and high conductivity coatings Included in repair kit 15D592. Spray Tip Selection Chart Accessories Gun Accessories Air Line Accessories Fluid Line Accessories Miscellaneous Accessories Page Page Technical Data Graco Standard Warranty Graco Information