Graham Field 14423-2 manual Setup, InstallIng or replaCIng the battery

5 setup

InstallIng or replaCIng the battery

WARNING: Ensure that Pocket Doppler power is off before replacing the battery.

WARNING: Install/replace the battery at least 6 feet (1.5 meters) from the patient.

WARNING: Use only 1.5V alkaline battery (AA, LR6) or Ni-MH 1.2V rechargeable battery in this device.

battery cover

battery installation

1.Open the battery compartment. Turn the Pocket Doppler upside down. Hold the main unit with one hand; press with thumb of other hand on the cover notch and push it upward and forward. The battery compartment will be open.

2.If replacing the battery, remove the old battery.

3.Install the battery, using 1.5V alkaline battery or Ni-MH 1.2V battery.

sNOTICE: Ensure battery direction matches cover symbols.

4. Close the battery compartment.

sNOTICE: If the Pocket Doppler will not be used for a prolonged period of time, remove the battery from the device.

14423-INS-LAB-RevE13 18