Graham Field US0208PL, US0458 user manual BED END Assembly, All bed models Assemble bed head end

BED END ASSEMBLY

All bed models: Assemble bed head end

1.Insert one locking and one non-locking caster into bed end. Locking casters must be installed diagonally from each other. See previous page for full-electric caster position options.

2.Standing directly in front of the bed end, position it as close to the bed as possible.

3.With one hand, reach over end and lift up the bed.

bed head end

frame (head)

Attach bed head end

4. Tilt the bed end slightly back toward you as shown above.

rivet

lock

Engage lower rivet Lower bed onto lock

5.Engage lower rivet slightly with corner lock and tilt end toward bed as shown at above left.

6.Lower bed onto corner lock as shown at above right.

All models: Assemble bed foot end

After bed head end has been attached, perform steps 1-6 in All models: Assemble bed head end above to install the foot end.

US0208-INS-LAB-RevD11 • Patriot Homecare Bed 9