BudgeTone-100 User Manual

Grandstream Networks, Inc.

 

 

 

Admin Password

SIP Server

Outbound Proxy

SIP User ID

Authentication

ID

Authenticate Password

Preferred

Vocoder

G723 Rate:

iLBC frame size

iLBC payload type

Silence

Suppression

Administrator password. Only administrator can configure the “Advanced Settings” page. Password field is purposely blanked for security reason after clicking update and saved. The maximum password length is 25 characters.

IP address or FQDN domain name provided by VoIP service provider. e.g., the following are some valid examples: sip.my-voip-provider.com or sip:my-company-sip-server.com or 192.168.1.200:5066 (where 5066 is the port number different to default 5060)

IP address or FQDN domain name of Outbound Proxy, or Media Gateway, or Session Border Controller. Used by IP phone for firewall or NAT penetration in different network environment. If symmetric NAT is detected, STUN will not work and ONLY outbound proxy will provide solution for it.

User account information, provided by VoIP service provider (ITSP), usually has the form of digits similar to phone number or actually a phone number

ID used for authentication, usually same as SIP user ID, but could be different and decided by the ITSP

Account information, password for IP Phone to register to (SIP) servers of ITSP. Maximum length is 25 characters.

The BudgeTone IP phone supports up to 8 different codec types including

G711-ulaw (PCMU), G711-alaw (PCMA), G723, G729A, G726-32 (ADPCM), G722, G728 and iLBC.

A user can configure codecs in a preference list that will be included with the same preference order in SDP message. The first codec in this list can be entered by choosing the appropriate option in “Choice 1”. Similarly, the last codec in this list can be entered by choosing the appropriate option in “Choice 8”.

Encoding rate for G723 codec. By default, 6.3kbps rate is set.

iLBC packet frame size. Default is 20ms.

For Asterisk IP-PBX, 30ms might need to be configured for compatibility

Payload type for iLBC. Default value is 97.

The valid range is between 96 and 127.

This controls the silence suppression/VAD feature of G723 and G729. If set to “Yes”, when a silence is detected, small quantity of VAD packets (instead of audio packets) will be sent during the period of no talking. If set to “No”, this feature is disabled.

- 32 -

Page 32
Image 32
Grandstream Networks 100 Series user manual Grandstream Networks, Inc