Grandstream Networks, Inc. | ||
|
|
|
Firmware
Upgrade and
Provisioning
Firmware Server Path
Config Server Path
Firmware File Prefix
Firmware File Postfix
Config File Prefix
Config File
Postfix
Firmware upgrade and Provisioning can be done via either TFTP or HTTP. This is mutual exclusive choice.
Default if HTTP.
Via TFTP: (default is pointing to Grandstream Firmware TFTP server)
The TFTP server needs to be configured. If it is
Be very careful when the TFTP is in progress (the phone’s LCD backlight will be ON). Do NOT interrupt the process (especially the power supply) otherwise might make the phone broken.
Be patient as in some network environment this process will take up to 15 minutes.
Via HTTP: (default is pointing to Grandstream Firmware HTTP server)
The URI for the web server used for firmware upgrade and configuration. For example, http://provisioning.mycompany.com:6688/Grandstream/1.0.8.16
Here “:6688” is the specific TCP port that the HTTP server is listening to, it can be omitted if using default port 80.
IP address or domain name (URI) of firmware server. Default to Grandstream’s firmware server
IP address or domain name (URI) of configuration server. Default to Grandstream’s server. It can be different with Firmware server.
Default blank. If configured, the phone will request the firmware file with the prefix.
Useful for provisioning of ITSPs. End user should keep it blank.
Default is blank. Similar to Prefix. End user should keep it blank.
Default is blank. The phone will request configure file prefix is configured. Used by ITSP for provisioning. End user should keep it blank.
Default is blank. End user should keep it blank.
- 38 -