End User Configuration, Software Version | Grandstream Networks 286

HandyTone -286 User Manual

Grandstream Networks, Inc.

6.2.2End User Configuration

Once this request is entered and sent from a Web browser, the IP phone will respond with the following login screen:

Grandstream Device Configuration

Password

Login

All Rights Reserved Grandstream Networks, Inc. 2005

The password is case sensitive with maximum length of 25 characters. The factory default password for End User and administrator is “123” and “admin” respectively. Only administrator can get access to “ADVANCED SETTING” configuration page.

NOTE:

If you cannot log into the configuration page by using default password, please check with the VoIP service provider. Most likely, the service provider has provisioned the device and configured for you and changed the default password.

•Status Page.

Grandstream Device Configuration

STATUS BASIC SETTINGS ADVANCED SETTINGS

MAC Address: 00.0B.82.08.74.D4

IP Address: 10.10.13.195

Product Model: HT286 REV 3.0

Program-- 1.0.8.19 Bootloader-- 1.0.8.11 HTML-- 1.0.8.19 VOC--

Software Version: 1.0.0.10

System Up Time: 0 day(s) 0 hour(s) 0 minute(s)

Registered: Yes

PPPoE Link Up: disabled

NAT: detected NAT type is full cone

NAT Mapped IP: 123.45.6.789

17

Image 17

Grandstream Networks End User Configuration, IP Address Product Model HT286 REV, Software Version, NAT Mapped IP

Contents

For Firmware Version HandyTone-286 Rev Table of Contents 388 Restore Factory Default SettingGrandstream Networks, Inc Welcome Installation Warranty What is Included in the PackageSafety Compliances Product Overview Key Features Model HandyTone-286 Hardware Specification Get Familiar with Key Pad and Voice Prompt Basic Operations Calling Phone or Extension Numbers Make Phone Calls Call Hold Direct IP CallsCall Waiting Voice Prompt with option 47, then Attended Transfer Call TransferBlind Transfer 6 3-way Conferencing Call FeaturesBell style conference Non-bell style conference LED Light Pattern Indication Fax Ringing Configuring HandyTone-286 with Web Browser Configuration GuideConfiguring HandyTone-286 IP through Voice Prompt Registered Yes PPPoE Link Up disabled End User ConfigurationIP Address Product Model HT286 REV Software Version NAT NAT Mapped Port End User Password Web PortStatistical Status IP Address Time Zone Update Dhcp hostname PPPoE passwordDhcp domain Dhcp vendor class Advanced User Configuration Dial Plan Prefix Use Bell-style Yes if Yes, *23 will be disabled Override MTU Size SIP Server AuthenticateHome NPA Preferred Vocoder G723 Rate Fax ModeILBC frame size ILBC payload type Timeout RebootUser ID is phone Number MWI Caller ID Scheme Special FeaturesOnhook Voltage Polarity Reversal Session Expiration TimerMin-SE Caller Request Firmware Upgrade Force TimerPath Config Server Path Postfix Config File Prefix Rebooting the HandyTone-286 from Remote Saving the Configuration ChangesVolume Amplification Click to relogin Configuration through a Central Server Firmware Upgrade through TFTP/HTTP Software Upgrade with Tftp Managing Firmware and Configuration File Download Configuration File DownloadFirmware and Configuration File Prefix and Postfix Step Restore Factory Default Setting Glossary of Terms Did DNSDSP Dtmf FXS Echo CancellationDhcp 323 IVR IP-PBXMTU NTP Rtcp PstnRTP SDP UDP TftpVAD Vlan