Display |
Language |
Allows user to choose preferred display language in web UI and key pad UI. The user can only load one secondary language
GXP has up to six line appearances, each with an independent SIP account. Each SIP account requires its own configuration page. Their configurations are identical.
Table 16: SIP Account Settings |
| |
Account Active | This field indicates whether the account is active. The default value for the | |
| primary account (Account 1) is Yes. The default value for the other two accounts | |
| is No. |
|
Account Name | The name associated with each account - displayed on LCD. | |
SIP Server | SIP Server’s IP address or Domain name provided by VoIP service provider. | |
Outbound Proxy | IP address or Domain name of Outbound Proxy, Media Gateway, or Session | |
| Border Controller. Used for firewall or NAT penetration in different network | |
| environment. If the system detects symmetric NAT, STUN will not work. ONLY | |
| outbound proxy can provide solution for symmetric NAT. |
|
SIP User ID | User account information provided by VoIP service provider (ITSP); either an | |
| actual phone number or formatted like one. |
|
Authenticate ID | SIP service subscriber’s Authenticate ID used for authentication. It can be | |
| identical to or different from SIP User ID. |
|
Authenticate Password | SIP service subscriber’s account password for GXP to register to (SIP) servers of | |
| ITSP. |
|
Name | SIP service subscriber’s name that is used for Caller ID display. | |
Use DNS SRV: | Default is No. If set to “Yes”, the client will use DNS SRV to look up server. | |
User ID is Phone | If the phone has an assigned PSTN telephone number, this field should be set to | |
Number | “Yes”. Otherwise, set it to “No”. If “Yes” is set, a “user=phone” parameter will be | |
| attached to the “From” header in SIP request |
|
SIP Registration | This parameter controls sending REGISTER messages to the proxy server. The | |
| default setting is “Yes”. |
|
| Default is No. If set to “Yes”, the SIP user’s registration information will be | |
| cleared on reboot. |
|
Register Expiration | This parameter allows user to specify the time frequency (in minutes) that GXP | |
| refreshes its registration with the specified registrar. The default interval is 60 | |
| minutes. The maximum interval is 65,535 minutes (about 45 days). | |
Local SIP Port | This parameter defines the local SIP port used to listen and transmit. The default | |
| value for Account 1 is 5060. It is 5062, 5064, 5066 for Account 2, Account 3 and | |
| Account 4 respectively. |
|
Grandstream Networks, Inc. | GXP User Manual | Page 34 of 40 |
| Firmware 1.1.6.16 | Last Updated: 05/2008 |
