TABLE 7: STATUS PAGE DEFINITIONS
Hardware Revision Hardware version number: Main Board, Interface Board
MAC Address The device ID in HEX format. This is a very important ID for ISP
troubleshooting.
IP Address This field shows WAN IP address of GXW-410x
Product Model This field contains the product model info (GXW4104 or GXW4108)
Software Version Program: This is the main software release. Boot and Loader are not changed
often.
System Up Time This field shows system up time since the last reboot.
Registered This field indicates whether the different SIP Accounts configured under
Channels page are successfully registered to the SIP server(s).
FXO Line Connected This field will give the status of each physical FXO Line connected to the
Gateway. It will update the status regularly.
Yes - Connected and Idle
Busy - Connected and Busy
No - Not connected
Additionally it will also provide real time Caller ID information of Incoming as
well as Outgoing calls.
PPPoE Link Up This field shows whether the PPPoE connection is running if connected to DSL
modem.
Detected NAT Type This field shows what kind NAT the GXW-410x is connected to via its W
A
N
port. It is based on STUN protocol.
ADVANCED USER SETTINGS ADVANCED USER CONFIGURATION
The end-user needs to login to the advanced user configuration page the same way as for the basic
configuration page.
FIGURE 5: SCREENSHOT OF ADVANCED USER CONFIGURATION
Grandstream Device Configuration
Password
Login
All Rights Reserved Grandstream Networks, Inc. 2005-2006
Advanced User configuration includes the end user configuration and advanced configurations including:
SIP configuration, Codec selection, NAT Traversal Setting and other miscellaneous configuration.
Grandstream Networks, Inc. GXW-410x User Manual Page 15 of 37
Firmware 1.0.0.53 Updated: 04/2007