SAVING THE CONFIGURATION CHANGES
Once a change is made, press the “Update” button in the Configuration Menu. The GXW-410x will display
the following screen to confirm that the changes have been saved. To activate changes, reboot or power
cycle the GXW-410x after all changes are made.
FIGURE 5: SCREEN-SHOT OF SAVE CONFIGURATION
REBOOTING FROM REMOTE
The administrator can remotely reboot the unit by pressing the “Reboot” button at the bottom of the
configuration menu. The following screen will indicate that rebooting is underway.
FIGURE 6: SCREEN-SHOT OF REBOOTING
The device is rebooting now...
You may re-login by clicking on the link below in 30 seconds.
Click to re-login
All Rights Reserved Grandstream Networks, Inc. 2005
The user can re-login to the unit after waiting for about 30 seconds.
Grandstream Networks, Inc. GXW-410x User Manual Page 26 of 37
Firmware 1.0.0.53 Updated: 04/2007