Grandstream Networks HandyTone-286 Basic Operations, Get Familiar with Key Pad and Voice Prompt

HandyTone -286 User Manual Grandstream Networks, Inc.

5Basic Operations

5.1Get Familiar with Key Pad and Voice Prompt

HandyTone-286 stores a voice prompt menu for quick browsing and simple configuration. To enter this voice prompt menu, simply press the button on the HandyTone-286 or pick up the phone and dial “***”. The following table shows how to use the voice prompt menu to configure the device.

Menu	Voice Prompt	User’s Options
Main Menu	“Enter a Menu Option”	Enter “*” for the next menu option
		Enter “#” to return to the main menu
		Enter 01 – 06, 47, 86 or 99 Menu option
01	“Static IP Mode”, or	Enter “9” to toggle the selection.
	“Dynamic IP Mode”	If user selects “Static IP Mode”, user need
		configure the all IP address information
		through menu 02 to 05. If user selects
		“Dynamic IP Mode”, the device will retrieve
		all IP address information from DHCP server
		automatically when user reboots the device.
02	“IP Address” + IP address	The current WAN IP address is announced
		Enter 12-digit new IP address if in Static IP
		Mode.
03	“Subnet” + IP address	Same as Menu option 02
04	“Gateway “ + IP address	Same as Menu option 02
05	“DNS Server” + IP address	Same as Menu option 02
06	“TFTP Server “ + IP address	Same as Menu option 02
47	“Direct IP Calling”	When entered, user will be prompted a dial
		tone, dial a 12-digit IP address to make a direct
		IP call.
		(For details, see “4.2.2 Make a Direct IP
		Call”.)
86	“No Voice Messages”; or	If there are voice messages, user can dial “9”
	“Voice Messages Pending”	and dial pre-configured phone number to
		retrieve voice message.
99	“RESET”	Enter “9” to reboot the device; or
		Enter MAC address to restore factory default
		setting (For details, see section 8.)
	“Invalid Entry”	Automatically return to Main Menu

NOTES:

9