Grandstream Networks, Inc. |
NAT/DHCP Server Information & Configuration:
Cloned WAN MAC
Addr:
LAN Subnet Mask:
LAN DHCP Base
IP:
DHCP IP Lease
Time:
DMZ IP:
(in hex format)
255.255.255.0 | (default is 255.255.255.0) | |
|
| |
192.168.2.1 | (base IP for the LAN port, default is 192.168.2.1) | |
|
| |
120 | (in units of hours, default is 120 hours or 5 days) | |
| ||
Port Forwarding:
WAN port 
WAN port 
WAN port 
WAN port 
WAN port 
WAN port 
WAN port 
WAN port 
0 | LAN IP | LAN port |
| ||
0 | LAN IP | LAN port |
| ||
0 | LAN IP | LAN port |
| ||
0 | LAN IP | LAN port |
| ||
0 | LAN IP | LAN port |
| ||
0 | LAN IP | LAN port |
| ||
0 | LAN IP | LAN port |
| ||
0 | LAN IP | LAN port |
|
Update
All Rights Reserved Grandstream Networks, Inc. 2004
0 | Protocol | " UDP Only" |
|
| |
0 | Protocol | " UDP Only" |
|
| |
0 | Protocol | " UDP Only" |
|
| |
0 | Protocol | " UDP Only" |
|
| |
0 | Protocol | " UDP Only" |
|
| |
0 | Protocol | " UDP Only" |
|
| |
0 | Protocol | " UDP Only" |
|
| |
0 | Protocol | " UDP Only" |
|
|
End User | This contains the password to access the Web Configuration Menu. |
Password | This field is case sensitive. |
IP Address | There are 2 modes under which the HandyTone ATA can operate: |
| - If DHCP mode is enabled, then all the field values for the Static IP |
| mode are not used (even though they are still saved in the Flash |
| memory.) The HandyTone ATA will acquire its IP address from the |
| first DHCP server it discovers from the LAN it is connected. |
| To use the PPPoE feature the PPPoE account settings need to be |
| set. The HandyTone will attempt to establish a PPPoE session if any |
| of the PPPoE fields is set. |
| - If Static IP mode is enabled, then the IP address, Subnet Mask, |
| Default Router IP address, DNS Server 1 (primary), DNS Server 2 |
| (secondary) fields will need to be configured. These fields are reset to |
| zero by default. |
17
