HandyTone-488 User Manual Grandstream Networks, Inc.
28
6.2.4 Saving the Configuration Changes
Once a change is made, users should press the “Update” button in the Configuration page.
The HandyTone-488 will then display the following screen to confirm that the changes have
been saved.
Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS
Your configuration changes have been saved.
They will take effect on next reboot.
All Rights Reserved Grandstream Networks, Inc. 2004
Users are recommended to power cycle the HandyTone-488 after seeing the above
message.
6.2.5 Rebooting the HandyTone-488 from Remote
The administrator of the HandyTone-488 can remotely reboot the HandyTone ATA by
pressing the “Reboot” button at the bottom of the configuration page. Once done, the
following screen will be displayed to indicate that rebooting is underway.
Grandstream Device Configuration
The device is rebooting now...
You may relogin by clicking on the link below in 30 seconds.
Click to relogin
All Rights Reserved Grandstream Networks, Inc. 2004
At this point, the user can relogin to the HandyTone-488 after waiting for about 30 seconds.