TABLE 8: HT496 Device Status Page Definitions
|
|
|
|
|
| MAC Address |
| The device ID in HEX format. This is needed for ISP troubleshooting. |
|
|
|
|
|
|
|
|
|
|
|
| WAN IP Address |
| Shows WAN IP address of HT496. |
|
|
|
|
|
|
|
|
|
|
|
| Product Model |
| Contains the product model info. |
|
|
|
|
|
|
|
|
|
|
|
| Software Version |
| Program: This is the main software release. Boot and Loader are seldom changed. |
|
|
|
|
|
|
|
|
|
|
|
| System Up Time |
| Shows system up time since the last reboot. |
|
|
|
|
|
|
|
|
|
|
|
| Registered |
| Indicates whether the HT496 is registered to the service provider’s server. |
|
|
|
|
|
|
|
|
|
|
|
| PPPoE Link Up |
| Indicates whether the PPPoE connection is up if the HT496is connected to DSL |
|
|
|
| modem. |
|
|
|
|
|
|
|
|
|
|
|
| NAT |
| Indicates the type of NAT the HT496 is connected to via its WAN port. Based on |
|
|
|
| STUN protocol. |
|
|
|
|
|
|
ADVANCED USER CONFIGURATION
Log in to the advanced user configuration page the same way as for the basic configuration page. The password is case sensitive and the factory default password for Advanced User is “admin”.
Advanced User configuration includes the end user configuration and the advanced configurations including: a) SIP configuration, b) Codec selection, c) NAT Traversal Setting and d) other miscellaneous configuration. HT496 each FXS SIP account has its own configuration page. Their configurations are identical.
Grandstream Networks, Inc. | HT496 User Manual | Page 20 of 29 |
| Firmware 1.0.3.86 | Last Updated: 7/2007 |
