PLACING A PHONE CALL

PHONE OR EXTENSION NUMBERS

1.Dial the number directly and wait for 4 seconds (Default “No Key Entry Timeout”); or

2.Dial the number directly and press # (Use # as dial key” must be configured in web configuration).

Examples:

1.Dial an extension directly on the same proxy, (e.g. 1008), and then press the # or wait for 4 seconds.

2.Dial an outside number (e.g. (626) 666-7890), first enter the prefix number (usually 1+ or international code) followed by the phone number. Press # or wait for 4 seconds. Check with your VoIP service provider for further details on prefix numbers.

DIRECT IP CALLS

Direct IP calling allows two parties with VoIP devices (e.g. HT496 and another VoIP Device), to talk to each other in an ad hoc fashion without a SIP proxy. Direct IP calls are possible if:

a)Both VoIP devices use a public IP address; or

b)Both VoIP devices are on the same LAN using private IP addresses, or

c)Both VoIP devices can be connected through a router using public or private IP addresses (with necessary port forwarding or DMZ).

To make a Direct IP Call, use either the handset or the speakerphone. Access the IVR using “***”, the button on the HT496or “47”. After dial tone, enter a 12-digit target IP address to place a call. Destination ports can be specified by using “*4” (encoding for “:”) followed by the port number.

Examples:

a)If the target IP address is 192.168.0.160, enter the 12 digit IP address (e.g. 1921680160) after the voice prompt followed by the “#” key or wait for 4 seconds. The default destination port 5060 is used if no port is specified.

b)If the target IP address/port is 192.168.1.20:5062, enter the 12 digit IP address + *45062 (e.g. 1921680160*45062) after the voice prompt followed by the “#” key or wait for 4 seconds.

CALL HOLD

Press the “flash” button to place a caller on hold. Press the “flash” button again to release call hold.

CALL WAITING

If call waiting feature is enabled, call waiting tone (3 short beeps) indicates an incoming call. Toggle between incoming call and current call by pressing the “flash” button. First call is placed on hold. Press the “flash” button to toggle between two active calls.

CALL TRANSFER

The HT496 supports both blind and attended transfer:

1.Blind Transfer: Press “flash” button (or hook flash on older models), dial *87, then dial the number to transfer call and press the “#” key (or wait 4 seconds) to complete transfer of active call.

Grandstream Networks, Inc.

HT496 User Manual

Page 11 of 29

 

Firmware 1.0.3.86

Last Updated: 7/2007

Page 10 Page 12
Page 11
Image 11
Grandstream Networks HT496 user manual Placing a Phone Call, Call Hold, Call Waiting, Call Transfer
Page 10 Page 12

HT496 specifications

Grandstream Networks has established itself as a leading provider of communication solutions, specializing in voice-over-IP (VoIP) technology. Among its diverse product line, the HT386, HT496, HT488, HT486, and HT286 analog telephone adapters stand out as exceptional devices tailored for seamless integration into modern telecommunication systems.

The Grandstream HT386 is particularly noted for its robust performance and versatility. It supports up to 4 lines, making it ideal for small to medium-sized businesses that require efficiency and reliability. The unit features advanced security protocols such as SRTP and TLS to protect voice communications, ensuring that data is secure during transmission. Additionally, the HT386 boasts an easy installation process and web-based management, which simplifies configuration and maintenance.

Next in line is the HT496, which caters to users with even more demanding requirements. This adapter accommodates up to 4 FXS ports, allowing the connection of multiple analog devices. Enhanced features like 2 SIP accounts and high-definition voice codecs ensure clear audio quality. The HT496 is designed to offer seamless interoperability with various IP routers and switches, making it a flexible solution for businesses expanding their communication framework.

The HT488, another notable entry, is geared towards those looking for high-performance analog telephony. With support for 2 lines and advanced echo cancellation technologies, it guarantees crystal-clear calls, minimizing disruptions during conversations. Additionally, it provides multiple network connectivity options, including DHCP and static IP, allowing users to choose the best configuration suitable for their network environment.

The HT486 offers similar benefits but is optimized for users who require a compact solution. This model features an elegant design while maintaining support for essential VoIP features. With 2 FXS ports and built-in firewall capabilities, it ensures secure and efficient communication for residential and small business users.

Finally, the HT286 is perfect for those seeking an entry-level adapter without compromising on quality. Supporting a single line with a straightforward setup process, it is ideal for users transitioning from traditional phone systems to VoIP technology. This model is also compatible with various VoIP service providers, ensuring users have flexibility when choosing their phone services.

In summary, Grandstream’s HT series—HT386, HT496, HT488, HT486, and HT286—delivers a comprehensive range of features and technologies suited for different communication needs. Each model combines quality with user-friendly interfaces, ensuring that users can fully leverage the benefits of VoIP, whether for personal or business use.
Top Page Image Contents