“Device not registered”

This prompt will be played immediately after off hook If the device is not register and the option “Outgoing Call without Registration” is in

NO

Five Success Tips when using the Voice Prompt

1.“*” shifts down to the next menu option

2.“#” returns to the main menu

3.“9” functions as the ENTER key in many cases to confirm or toggle an option

4.All entered digit sequences have known lengths - 2 digits for menu option and 12 digits for IP address. For IP address, add 0 before the digits if the digits are less than 3 (i.e. - 192.168.0.26 should be key in like 192168000026. No decimal is needed).

5.Key entry cannot be deleted but the phone may prompt error once it is detected

Placing a Phone Call

Phone or Extension Numbers

1.Dial the number directly and wait for 4 seconds (Default “No Key Entry Timeout”); or

2.Dial the number directly and press # (Use # as dial key” must be configured in web configuration).

Examples:

1.Dial an extension directly on the same proxy, (e.g. 1008), and then press the # or wait for 4 seconds.

2.Dial an outside number (e.g. (626) 666-7890), first enter the prefix number (usually 1+ or international code) followed by the phone number. Press # or wait for 4 seconds. Check with your VoIP service provider for further details on prefix numbers.

Direct IP Calls

Direct IP calling allows two parties, that is, a FXS Port with an analog phone and another VoIP Device, to talk to each other in an ad hoc fashion without a SIP proxy.

Elements necessary to completing a Direct IP Call:

1.Both HT70X and other VoIP Device, have public IP addresses, or

2.Both HT70X and other VoIP Device are on the same LAN using private IP addresses, or

3.Both HT70X and other VoIP Device can be connected through a router using public or private IP addresses (with necessary port forwarding or DMZ).

HT70X supports two ways to make Direct IP Calling:

Using IVR

1.Pick up the analog phone then access the voice menu prompt by dial “***

2.Dial “47” to access the direct IP call menu

3.Enter the IP address after the dial tone and voice prompt “Direct IP Calling”

Using Star Code

1.Pick up the analog phone then dial “*47

2.Enter the target IP address.

Grandstream Networks, Inc.

HT-70X User Manual

Page 12 of 35

 

Firmware Version 1.0.0.18

Last Updated: 03/2012

Page 12
Image 12
Grandstream Networks HT704 Placing a Phone Call, Examples, Elements necessary to completing a Direct IP Call, Using IVR

HT704, HT701, HT702 specifications

Grandstream Networks has established itself as a powerful player in the telecommunications industry, especially through its Analog Telephone Adapters (ATAs) like the HT702 and HT704 models. These devices are designed specifically for converting analog voice signals into digital data for seamless integration with Voice over Internet Protocol (VoIP) systems.

The Grandstream HT702 is a two-port ATA that allows users to connect two analog phones to a high-speed internet connection. This model is particularly useful for small businesses or residential users looking to integrate legacy phone systems with modern VoIP technology. One of the key features of the HT702 is its support for the SIP (Session Initiation Protocol) standard, ensuring compatibility with a wide range of VoIP providers. Additionally, it supports advanced telephony features like call transfer, call waiting, and three-way calling, enhancing communication efficiency.

The HT704, on the other hand, is a four-port ATA, offering greater flexibility for users needing to connect multiple devices. It shares many of the same features as the HT702, including SIP support and telephony functionalities, but with additional ports, it is better suited for larger environments. Both models come equipped with advanced security mechanisms, such as AES encryption, which safeguards voice communications.

With user-friendly web-based configuration, the HT702 and HT704 allow for easy setup and management, making them accessible even for those without extensive technical knowledge. Moreover, both devices feature auto-provisioning capabilities, which simplify deployment across multiple units, making them ideal for businesses looking to scale their operations.

The HT702 and HT704 are built with high-quality materials, ensuring durability and long-term performance. They also boast low power consumption, making them an energy-efficient choice. Support for high-definition voice codecs enhances audio quality during calls, providing users with crystal-clear communication.

In summary, Grandstream's HT702 and HT704 Analog Telephone Adapters are robust solutions for anyone looking to transition from traditional telephony to a modern VoIP setup. Their advanced features, security standards, and ease of use make them a reliable choice for both home and business users seeking efficient and effective communication solutions.