Table 12: HT704 FXS Ports Settings

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SIP Use ID

 

 

 

User account information, provided by VoIP service provider (ITSP). Usually in the form

 

 

 

 

 

 

 

 

 

 

of digit similar to phone number or actually a phone number.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Authenticate ID

 

 

 

SIP service subscriber’s Authenticate ID used for authentication. Can be identical to or

 

 

 

 

 

 

 

 

 

 

different from SIP User ID.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Password

 

 

 

SIP service subscriber’s account password for HT704 to register to (SIP) servers of

 

 

 

 

 

 

 

 

 

 

ITSP.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Name

 

 

 

Any name to identify this specific user.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Profile ID

 

 

 

Select the corresponding Profile ID between Profile 1 and Profile 2.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hunting Group

 

 

 

This feature enables the HT704 to register all existing FXS ports with the same phone

 

 

 

 

 

 

 

 

 

 

number. Each incoming call will be routed to first available port in Linear or Circular

 

 

 

 

 

 

 

 

 

 

mode. User may configure all ports as members of the same Hunting Group or it may

 

 

 

 

 

 

 

 

 

 

configure different port combinations for more than one Hunting Group. For example:

 

 

 

 

 

 

 

 

 

 

Ports 1, 3 and 5 are members of the same Hunting Group, the rest of the ports may

 

 

 

 

 

 

 

 

 

 

have separate numbers and may be reached independently. Any port, member of a

 

 

 

 

 

 

 

 

 

 

Hunting Group that is not registered with a SIP account, will be able to place outbound

 

 

 

 

 

 

 

 

 

 

calls using the SIP credentials of the primary Hunting Group port.

 

 

 

 

 

 

 

 

 

 

For example: Port 1, 2, and 3 are members of the same Hunting Group. Port 1 is

 

 

 

 

 

 

 

 

 

 

registered with a SIP account. Ports 2, and 3 are not registered. Ports 2 and 3 will be

 

 

 

 

 

 

 

 

 

 

able to place outbound calls using the SIP account of port 1. Select appropriate value

 

 

 

 

 

 

 

 

 

 

for Hunting Group feature. The original SIP account should be set to Active while the

 

 

 

 

 

 

 

 

 

 

group members should be set to the port number of the Active Port.

 

 

 

 

 

 

 

 

 

 

Example configuration of a Hunting group:

 

 

 

 

 

 

 

 

 

 

FXS Port #1: SIP UserID and Authenticate ID entered, Hunting group set to "Active"

 

 

 

 

 

 

 

 

 

 

FXS Port #2: SIP UserID and Authenticate ID left blank, Hunting Group set to "1"

 

 

 

 

 

 

 

 

 

 

FXS Port #3: SIP UserID and Authenticate ID left blank, Hunting Group set to "1"

 

 

 

 

 

 

 

 

 

 

FXS Port #4: SIP UserID and Authenticate ID entered, Hunting group set to "None"

 

 

 

 

 

 

 

 

 

 

Hunting Group 1 contains ports 1, 2, 3. FXS port 4 is registered but it is not added to

 

 

 

 

 

 

 

 

 

 

the Hunting Group 1.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Offhook Auto-dial

 

 

 

This feature allows you to automatically dial the number specified in this field as soon

 

 

 

 

 

 

 

 

 

 

as the port is offhooked, i.e. when the receiver on the phone connected to Port# is

 

 

 

 

 

 

 

 

 

 

picked up.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Map to FXP Port #

 

 

 

This is used only when peering with a Grandstream GXW410x. Default is 1, Supported

 

 

 

 

 

 

 

 

 

 

values are 1-8, meaning line 1 to line 8 of the GXW410x device where the port will be

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

mapped to.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Map to FXO Gateway IP

 

 

 

This is used when peering with an FXO gateway of any brand. You have to specifically

 

 

 

 

 

 

 

 

 

 

mention the IP address where the call will be sent to.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and Port

 

 

 

Sip port that will be annexed to the IP address above.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Saving the Configuration Changes

Click the “Update” button in the Configuration page to save the changes to the HT70X configuration. The following screen confirms that the changes are saved. Reboot or power cycle the HT70X to make the changes take effect.

Rebooting the HT70X from Remote

Press the “Reboot” button at the bottom of the configuration menu to reboot the ATA remotely. The web browser will then display a message window to confirm that reboot is underway. Wait 30 seconds to log in again.

Grandstream Networks, Inc.

HT-70X User Manual

Page 30 of 35

 

Firmware Version 1.0.0.18

Last Updated: 03/2012

Page 29 Page 31
Page 30
Image 30
Grandstream Networks HT702 HT704 FXS Ports Settings, Saving the Configuration Changes, Rebooting the HT70X from Remote
Page 29 Page 31

HT704, HT701, HT702 specifications

Grandstream Networks has established itself as a powerful player in the telecommunications industry, especially through its Analog Telephone Adapters (ATAs) like the HT702 and HT704 models. These devices are designed specifically for converting analog voice signals into digital data for seamless integration with Voice over Internet Protocol (VoIP) systems.

The Grandstream HT702 is a two-port ATA that allows users to connect two analog phones to a high-speed internet connection. This model is particularly useful for small businesses or residential users looking to integrate legacy phone systems with modern VoIP technology. One of the key features of the HT702 is its support for the SIP (Session Initiation Protocol) standard, ensuring compatibility with a wide range of VoIP providers. Additionally, it supports advanced telephony features like call transfer, call waiting, and three-way calling, enhancing communication efficiency.

The HT704, on the other hand, is a four-port ATA, offering greater flexibility for users needing to connect multiple devices. It shares many of the same features as the HT702, including SIP support and telephony functionalities, but with additional ports, it is better suited for larger environments. Both models come equipped with advanced security mechanisms, such as AES encryption, which safeguards voice communications.

With user-friendly web-based configuration, the HT702 and HT704 allow for easy setup and management, making them accessible even for those without extensive technical knowledge. Moreover, both devices feature auto-provisioning capabilities, which simplify deployment across multiple units, making them ideal for businesses looking to scale their operations.

The HT702 and HT704 are built with high-quality materials, ensuring durability and long-term performance. They also boast low power consumption, making them an energy-efficient choice. Support for high-definition voice codecs enhances audio quality during calls, providing users with crystal-clear communication.

In summary, Grandstream's HT702 and HT704 Analog Telephone Adapters are robust solutions for anyone looking to transition from traditional telephony to a modern VoIP setup. Their advanced features, security standards, and ease of use make them a reliable choice for both home and business users seeking efficient and effective communication solutions.
Top Page Image Contents