DO NOT try to stabilize the machine by putting your foot on the ground.
Know the weight of loads. Limit loads to those you can safely control and the unit can safely handle.
ALWAYS keep protective structures, guards and panels in good repair, in place and securely fastened.
DO NOT operate in reverse unless absolutely necessary. ALWAYS look down and behind before and while backing.
Watch for holes, ruts, or bumps. Uneven terrain could overturn the machine.
ALWAYS allow adequate clearance for unit, attachments, operator and objects in work area when turning. Slow down before turning.
NEVER carry passengers.
Hazardous Slopes
If you cannot back up a slope or you feel uneasy on it, do not mow it.
Mow up and down slopes, not across them.
Keep all movements on the slope slow and gradual. DO NOT make sudden changes in speed or direction.
Avoid starting or stopping on a slope. If tires lose traction, disengage the blades and proceed slowly straight down the slope.
DO NOT operate on slopes over 10˚.
DO NOT park on slopes unless absolutely necessary. If you must park on a slope, always chock or block wheels. Always set parking brake.
Transport
Use extra care when loading or unloading unit onto trailer or truck.
Secure unit chassis to transport vehicle. NEVER secure from rods or linkages that could be damaged.
DO NOT transport machine while engine is running.
ALWAYS turn off power to attachment when transporting.
MAINTENANCE AND SERVICE SAFETY RULES
Disengage PTO, stop engine, remove key and wait for all moving parts to stop before servicing, making repairs, adjusting or when clearing debris.
ALWAYS block wheels. Know all jack stands are strong, secure and will hold weight of unit during maintenance.
ALWAYS keep protective structures, guards, and panels in good repair, in place and securely fastened. NEVER modify or remove safety devices.
Fumes from engine exhaust can cause injury or death. DO NOT run engine in an enclosed area. Always provide good ventilation.
Keep unit free of grass, leaves, or other debris. Clean up oil or fuel spills.
Check grass can and catcher parts prior to each use for any holes, abrasions, mildew, or structural damage. Replace parts when necessary.
Keep all hardware properly tightened.
Cleaning
Keep unit free of debris. Clean up oil or fuel spills.
STORAGE SAFETY RULES
DO NOT store grass can with grass in them.
For extended storage, clean unit thoroughly. See Engine Manual for proper storage.
ALWAYS lower cutting deck when unit is parked or stored.
FUEL SAFETY RULES
Fuel is highly flammable and its vapors are explosive. Handle with care. Use an approved fuel container.
NO smoking, NO sparks, NO flames. ALWAYS allow engine to cool before servicing.
NEVER fill fuel tank when engine is running or hot from operation.
NEVER fill or drain fuel tank indoors.
Replace fuel cap securely and clean up spilled fuel.
ACCESSORY AND ATTACHMENT SAFETY RULES
Use only attachments or accessories designed for your unit and properly installed.
Check attachment components frequently. If worn or damaged, replace with manufacturer’s recommended parts.
Grass catcher components are subject to wear, damage, and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer’s recommended parts, when necessary.
GB - 5
