![](/images/new-backgrounds/1267680/267680129x1.webp)
INA Module Maintenance Options
Each error statistic represents the sum of error events from all valid intervals including the current interval. The message “9999” represents an overflow situation.
You can refresh the
Current Events
The Current error event screen reports error statistics for the
Menu: Maintenance→ Slot→ Slot#→ Enter→ Error Events→ Current
The events reported are the same as for the 24 hour event totals screen.
You can refresh the Current screen by pressing → Back and then pressing → Current again.
Selected Interval Events
The Selected Interval Events screen reports on error statistics for a specific
Menu: Maintenance→ Slot→ Slot#→ Enter→ ErrorEvents→ Interval→
Interval#→ Enter
Note – Invalid intervals have all zeroes for error data, but no visual indication is given to show that the interval is not valid. You can, however, compute the total number of invalid intervals by subtracting the valid interval count on the
Clearing Error Events
The Clear Error Events screen causes error events for all intervals, including the current interval, to be cleared. From your system programming console, use the following sequence to access the Clear Error Events screen. Be sure to select the corresponding INA module slot number.
Menu: Maintenance→ Slot→ Slot#→ Enter→ Error Events→ Clear
To stop the clear event and retain all error events, press → Back or → Cancel. You will return to the Error events screen.