OPERATING
Daily Operating Checklist
❏Test safety systems.
❏Check tire pressure.
❏Check fuel level.
❏Check engine oil level.
❏Remove and clean engine air filter.
❏Check transmission oil reservoir level.
❏Remove grass and debris from machine.
❏Clean engine cooling air intake screen and cooling fins.
❏Inspect all belts for damage.
❏Sharpen and balance mower blades.
❏Check area below machine for any fuel or oil leaks.
Console Controls
E
F 
B
A
D
C
Operating Controls
F
A
D
E
MX9205
A - Throttle Lever |
B - Key Switch |
C - Choke Lever |
D - PTO/Clutch Switch |
E - Hourmeter |
B
C
G
F - Ammeter |
Testing Safety Systems
cCAUTION: Avoid injury! Engine exhaust fumes
contain carbon monoxide and can cause serious illness or death.
Move the vehicle to an outside area before running the engine.
Do not run an engine in an enclosed area without adequate ventilation.
MX9206
A- Park Brake Lever
B-
C- Mower Deck Lift/Lower Pedal
D- Mower Deck Transport Position Lock Lever
E- Fuel Shutoff Valve
F- Steering Control Levers
G- Console
•Connect a pipe extension to the engine exhaust pipe to direct the exhaust fumes out of the area.
•Allow fresh outside air into the work area to clear the exhaust fumes out.
Use the following checkout procedure to check for normal operation of machine.
If there is a malfunction during one of these procedures, do not operate machine. See your Great Dane dealer for service.
Perform these tests in a clear open area. Keep bystanders away.
Operating - 6
