WARNING: The Engine Exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
California Proposition 65 Warning
All information, illustrations and
specifications in this manual are based on
the latest information at the time of
publication. The right is reserved to make
changes at any time without notice.
COPYRIGHT© 2006
Auburn Consolidated Industries, Inc.
All rights reserved Previous Editions COPYRIGHT© 2002
GreatDane, Surfer, Brutus, Chariot, Scamper, and Super Surfer are trademarks of Auburn Consolidated Industries, Inc.
Introduction
Using Your Operator’s Manual
This manual is an important part of your machine and should remain with the machine when you sell it.
Use the safety and operating information in the machine operator’s manual to operate and service the machine safely and correctly.
An engine manufacturer’s owner’s manual has been provided with your machine. This will provide maintenance and troubleshooting information for the engine installed in your machine.
Specifications and design are subject to change without notice.
Special Messages
Your manual contains special messages to bring attention to potential safety concerns, machine damage as well as helpful operating and servicing information. Please read all the information carefully to avoid injury and machine damage.
c
CAUTION: Avoid injury! This symbol and text highlight potential hazards or death to the operator or bystanders that may occur if the hazards or procedures are ignored.
IMPORTANT: Avoid Damage! This text is used to tell the operator of actions or conditions that might result in damage to the machine.
NOTE: General information is given throughout the manual that may help the operator in the operation or service of the machine.
Product Identification
Record Identification Numbers
Surfer
GSRKA1952S Serial Number
GSRKW2352S Serial Number
If you need to contact an Authorized Service Center for information on servicing, always provide the product model and serial numbers.
You will need to locate the model and serial numbers for the machine and for the engine of your machine and record the information in the spaces provided.
