Installing Backsplash Panels
HOOD END PANEL
HOLES SHOULD BE SPACED TO ADEQUATELY SECURE THE PANEL TO THE WALL STUDS (HOLE SPACING
AND FASTENERS PROVIDED BY OTHERS)
HOOD FRONT PANEL
SLIDE FLANGE
BEHIND BACK
OF THE HOOD
BACKSPLASH PANEL
SECTION VIEW
OF BACKSPLASH
PANEL OVERLAP
Fig. 23
1.After the hood is hung in position, slide the flat flange of the backsplash panel behind the back of the hood.
Note: If the backsplash panel length is greater than 46 in. (116.84 cm), it will be shipped in multiple pieces.
2.After the backsplash panel has been positioned, drill holes in the panel and fasten to the wall. (fasteners provided by others).
Note: The holes should be spaced to adequately secure the panel to the wall.
3.Caulk the joints between the hood and the backsplash panel with NSF Approved silicone caulk (GE SCS1009, or its equivalent). The caulk is not provided.
4.Caulk the joint between the backsplash panels when multiple panels are required, with NSF Approved silicone caulk (GE SCS1009, or its equivalent). The caulk is not provided.
15 Canopy Hood
®