Direct Drive Specifications

Model SQ

Duct mounted supply, exhaust or return fans shall be of the centrifugal, direct driven, inline type. The fan housing shall be of a square design constructed of heavy-gauge galvanized steel or aluminum and shall include square duct mounting collars.

Fan construction shall include two removable access panels located perpendicular to the motor mounting panel. The access panels must be of sufficient size to permit easy access to all interior components.

The fan wheel shall be centrifugal, backward inclined, constructed of aluminum, and shall include a wheel cone carefully matched to the inlet cone for precise running tolerances. Wheels shall be statically and dynamically balanced.

Motors shall be permanently lubricated and carefully matched to the fan loads. Motors shall be readily accessible for maintenance.

A NEMA-1 disconnect switch shall be provided as standard, except with explosion resistant motors, where disconnects are optional. Factory wiring shall be provided from motor to the handy box.

All fans shall bear the AMCA Certified Ratings Seal for Sound and Air Performance.

Fan shall bear a permanently affixed manufacturer’s nameplate containing the model number and individual serial number for future identification.

Fan shall be model SQ as manufactured by Greenheck Fan Corporation of Schofield, Wisconsin, USA.

LEED information

Greenheck became one of the first manufacturers in the Air Movement and Control industry to join the LEED/green movement when they joined the United States Green Building Council (USGBC) in 2005. Greenheck has been actively researching qualification requirements for our products to meet LEED credits and prerequisites.

The Vari-Green®motor significantly helps qualification efforts for the

Energy and Atmosphere credits and prerequisites; specifically credit one, Optimize Energy Performance and prerequisite two, Minimum Energy Performance.

Vari-Green®Motor

Motor to be an electronic commutation (EC) motor specifically designed for fan applications. AC induction type motors

are not acceptable. Examples of

unacceptable motors are: Shaded Pole, Permanent Split Capacitor (PSC), Split Phase, Capacitor Start and 3 phase induction type motors. Motors shall be permanently lubricated with heavy-duty ball bearings to match the fan load and prewired to the specific voltage and phase. Internal motor circuitry shall convert AC power supplied to the fan to DC power to operate the motor. Motor shall be speed controllable down to 20% of full speed (80% turndown). Speed shall be controlled by either a potentiometer dial mounted on the motor or by a 0-10 VDC signal. Motor shall be a minimum of 85% efficient at all speeds.

Vari-Green®Controls

Constant Pressure

Greenheck’s Constant Pressure system shall be a complete package designed to regulate fan speed based on demand while maintaining a constant static pressure. System shall include fan with Vari- Green Motor, Vari-Green Constant Pressure control, transformer, and pressure tap. Vari-Green Constant Pressure control shall have the transducer integrated with a touch button control panel. Control shall have a run mode and a program mode preventing unwanted changes when in run mode. Transformer shall be factory-supplied to provide power to the Vari-Green Constant Pressure controller. System shall include

a self-sealing aluminum pressure tube with ¼-inch connection. Fan shall be centrifugal direct drive type in upblast, downblast, or inline configuration with controllable EC Vari-Green motor.

Remote Dial

Remote dial shall be a Vari-Green control specifically designed to provide 0-10 volt DC signal to Greenheck’s Vari-Green Motor.

2-Speed

2-Speed control shall be a Vari-Green Control specifically designed to allow the Vari-Green Motor to operate at two distinct speeds. 2-Speed control shall include two dials that may be set at any point between 0 and 10 volts DC and an integral transformer capable of reducing 115/230 volt AC power to 24 volt AC power.

46

Page 45 Page 47
Page 46
Image 46
Greenheck Fan SQ/BSQ manual Model SQ, Leed information, Constant Pressure, Remote Dial, Speed
Page 45 Page 47

SQ/BSQ specifications

The Greenheck Fan SQ/BSQ series represents a significant advancement in the realm of ventilation solutions, designed to cater to both commercial and industrial applications. With an emphasis on performance, efficiency, and reliability, these fans have become a go-to choice for engineers and contractors alike.

One of the main features of the SQ/BSQ series is their advanced airflow design. The fans are engineered with high-performance backward-inclined blades, which not only optimize airflow but also minimize noise levels, making them ideal for settings where quiet operation is essential. This design allows the SQ/BSQ fans to handle a wide range of static pressures, delivering consistent airflow even in varying conditions.

Another notable characteristic of the SQ/BSQ fans is their robust construction. Made with high-quality materials, these fans are built to withstand the rigors of industrial environments. The casings are typically constructed from galvanized steel, with optional coatings available for enhanced corrosion resistance. This durability ensures long-lasting performance, reducing the need for frequent replacements and maintenance.

Equipped with the latest motor technology, the SQ/BSQ series offers energy-efficient options that comply with various energy standards. The fans utilize a range of motor types, including premium efficiency and electronically commutated motors (ECM), which contribute to lower operating costs and reduced energy consumption. This focus on energy efficiency aligns with increasing regulatory requirements and environmental considerations.

The SQ/BSQ series also embraces advanced control technologies. Through the integration of variable frequency drives (VFD), users can achieve precise control over fan speed and airflow, allowing for better system optimization. This capability is particularly beneficial in applications where airflow demands fluctuate, ensuring that energy usage remains efficient.

Lastly, Greenheck has prioritized ease of installation and maintenance with the SQ/BSQ models. The fans are designed to facilitate quick installation, featuring accessible service points for maintenance tasks. This ease of access helps reduce downtime and improves overall operational efficiency.

In summary, the Greenheck Fan SQ/BSQ series combines advanced airflow design, robust construction, energy-efficient motor technology, and intelligent control options to deliver a comprehensive and reliable ventilation solution. Whether used in commercial buildings, warehouses, or industrial facilities, these fans stand out for their performance and versatility, making them a preferred choice in the ventilation market.
Top Page Image Contents